Cart 2 india

Specification
Brand : LECLOC
BulletPoint : This ASME safety pressure relief valve has a brass body, a 100 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief
BulletPoint1 : 3/4” NPT Thread Connection【Attention】3/4” NPT doesn't mean 3/4" diameter of the pipe thread. The outside thread diameter is 1.05”
BulletPoint2 : 210°F (99°C), 150 psi, Max 1.3 Mpa, 200,000 BTU/hr
BulletPoint3 : Thickened Brass Body and Stainless Steel Pressure Spring with Epoxy-Coated Probe and Lever
BulletPoint4 : Temperature and Pressure Safety Relief Valve for Water Heaters, Boilers and Hot Water Storage Tanks 3/4 Inch NPT Threaded
BulletPoint5 : Side or Top Tapping Installation
BulletPoint6 : 【Warm Tip】 Please open your tank water heater door to check the right size 1/2" or 3/4" NPT thread needed before ordering! As most returns so far have been "Ordered the wrong size". For example, Suburban some models such as 5243A, SW10DE need the 3/4" NPT thread size, while some need the 1/2" NPT thread size. Thanks
Color : Copper
ConnectorType : Threaded
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 724920095266
ExternallyAssignedProductIdentifier2 : 0724920095266
ExternallyAssignedProductIdentifier3 : 00724920095266
GpsrSafetyAttestation : 1
IncludedComponents : Relief Valve
ItemName : LECLOC RV Water Heater Relief Valve, 210°F 150 psi Temperature & Pressure Relief Valve, Thickened Brass Body with Extended Probe 200,000 BTU/h, Hot Water Tanks Pressure Release Valve, 3/4" NPT Thread
ItemPackageDimensions_Height : 19.1008 centimeters
ItemPackageDimensions_Length : 3.9116 centimeters
ItemPackageDimensions_Width : 5.7912 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : LECLOC
Material : Brass
Material1 : Brass
Material2 : Stainless Steel
MaximumOperatingPressure : 180 pounds_per_square_inch
ModelName : NH-361
ModelNumber : RVETADN20
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : RVETADN20
ProductDescription : LECLOC T&P Relief Valve Maintenance: After installing, the valve lever should be lifted at least once per year to make sure that the water-ways are unobstructed. Some naturally occurring mineral deposits may glue to the valve, blocking waterways, rendering it invalid. When manually operating the lever, hot water will drain .So please take all reasonable precautions to keep away from hot water. Before operating lever, check the discharge pipe which connecting the relief valve. Ensure that the hot water can flow into a proper place. Otherwise it may cause the personal injury. If no water draining out, it proves that the relief valve is unable to take effect. Please turn off the water heater immediately and call a professional to check the valve.
ProductSiteLaunchDate : 2024-01-30T13:38:21.155Z
Size : ‎3/4" NPT Thread
SkipOffer : 1
SpecificationMet : ASME B16.34, UV, NB-501
SpecificationMet1 : ASME B16.34
SpecificationMet2 : ASTM
SpecificationMet3 : NSF
StreetDate : 2016-03-06T00:00:01Z
Style : 150 psi 210°F
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Pressure Relief Valve