Cash Acme 3/4 Inch RV VR20 Vacuum Relief Valve Vent with Dust Cover, Bronze, 22398LF

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 4400/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Cash Acme
BulletPoint1 : HOT WATER SUPPLY: Our vacuum relief valve is designed specifically to protect the hot water supply system where over-pressure conditions are likely to occur as a result of thermal expansion
BulletPoint2 : DOMESTIC AND COMMERCIAL APPLICATIONS: Can be used for both domestic household and commercial job site applications
BulletPoint3 : COMPLETELY AUTOMATIC: The VR20 Vacuum Relief Valve reseals after pressure relief
BulletPoint4 : INSTALLATION: The valve may be installed directly on the tank or in a tee and is appropriate for either side (hot or cold) of the water heater
BulletPoint5 : PRODUCT SPECIFACTIONS: Fitted with a bronze body and has a stainless steel internal part, silicone seat disc and stainless steel pressure spring
BulletPoint6 : 1/2 Inch NPT Threads Connection【Please check the right size 1/2" or 3/4" NPT needed before ordering!】
Color : Gold
ConnectorType : Threaded
ControlMethod : touch
ExteriorFinish : Stainless Steel
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier : 00197809018548
ExternallyAssignedProductIdentifier1 : 697285052307
ExternallyAssignedProductIdentifier2 : 0697285052307
ExternallyAssignedProductIdentifier3 : 00098268472523
IncludedComponents : Vacuum Relief Valve
ItemDisplayWeight : 1.44 ounces
ItemName : Cash Acme 3/4 Inch RV VR20 Vacuum Relief Valve Vent with Dust Cover, Bronze, 22398LF
ItemPackageDimensions_Height : 4.9022 centimeters
ItemPackageDimensions_Length : 4.2926 centimeters
ItemPackageDimensions_Width : 4.699 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
ItemTypeName : VR-20
Manufacturer : Cash Acme
Material : Bronze
MaximumOperatingPressure : 135 pounds_per_square_inch
ModelName : VR-20
ModelNumber : 22398LF
NumberOfItems : 1
PackageLevel : unit
PartNumber : 22398LF
ProductDescription : This Control Devices SV-135 ASME safety valve has a brass body, a 135 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure. This safety valve is American Society of Mechanical Engineers (ASME) safety rated and displays the UV mark for pressure vessel safety valves. It also displays the NB mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. This safety valve has a 53 Standard Cubic Feet per Minute (SCFM) flow rate and is suitable for low capacity pressure relief applications such as in home construction air compressors. Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
ProductSiteLaunchDate : 2020-09-29T16:47:23.831Z
Size : 3/4 in.
SpecificationMet : ASME B16.34
SpecificationMet1 : CSA
SpecificationMet2 : ansi
Style : VR-20
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
ValveType : relief valve,vacuum relief valve,valve

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.