Cart 2 india

Specification
Brand : PRO-EDGE INDUSTRIAL PNEUMATICS AND CONTROLS
BulletPoint1 : This Brass Safety Valve Is Preset At 125 PSI And Has a Flow Rate (SCFM) Of 112
BulletPoint2 : This Safety Valve Is Made In The USA
BulletPoint3 : This Safety Valve Has An Operating Temperature Range of -65 Degrees Fahrenheit To 400 Degrees Fahrenheit
BulletPoint4 : Please Note 1/8" NPT Measures 0.405" Outside thread diameter in inches. See attached NPT Thread chart.
BulletPoint5 : Other Thread Sizes And PSI Options Are Available. Please Reach Out With Questions.
Color : Brass
ExteriorFinish : Silicone
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Bronze
ExteriorFinish3 : Brass
ExternallyAssignedProductIdentifier1 : 697285232792
ExternallyAssignedProductIdentifier2 : 0697285232792
IncludedComponents : Temperature & Pressure Relief Valve
ItemName : Brass, 1/8" NPT Industrial Soft Seat Safety Pressure Relief Valve, Made In The USA (125 PSI / 112 SCFM)
ItemPackageDimensions_Height : 18.7 centimeters
ItemPackageDimensions_Length : 1.9 centimeters
ItemPackageDimensions_Width : 9.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : Conrader
Material : Brass
MaximumOperatingPressure : 125 pounds_per_square_inch
ModelName : NCLX-1
ModelNumber : SRV250-18
NumberOfItems : 1
PartNumber : SRV250-18
ProductDescription : A soft seat safety relief valve typically uses an elastomer material, such as Silicone or Viton. The sealing material in the internals of the valve will depend on the compatibility of media flowing through the valve. This Safety Valve is NOT adjustable. This Safety Valve Is Preset at 125 PSI And Has a Flow Rate (SCFM) Of 112. Conrader safety valves are designed to protect unfired pressure vessels and systems from over pressure in compressed air and gas applications. The valves are not deemed "Lead Free". The soft seat safety valve (SRV-Series) has an elastomer seal. Set Pressure Tolerance: +2 psig up to and including 70 psig, +3% of set pressure greater than 70 psig. Operating Temperature Range: -65 degrees Fahrenheit to 400 degrees Fahrenheit. Materials of Construction: Seat, Cap, Piston: ASTM B16 Brass Spring: 17-7 Stainless Steel Seal: Silicone or Viton. Certifications: ASME Boiler & Pressure Vessel Code Section VIII Division 1 CSA B51 Boiler, Pressure, Vessel, and Pressure Piping Code
ProductSiteLaunchDate : 2022-06-02T17:59:27.127Z
SpecificationMet : ASME
Style : 125 PSI / 112 SCFM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : safety relief valve