Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 0887785 Total Relief Valve Kit Fits For 1-inch F009M2, 009M2 backflow preventer, Series RK-009, for RK 009M2-VT model
BulletPoint2 : Replace for part number 0887785, 887785
BulletPoint3 : 0887785 As a part of the backflow protection device, the Total Relief Valve Kit effectively helps to repair the check valve, reduces water leakage, works well to prevent contaminated water from entering the clean water supply system, and protect your water supply system for a long time
BulletPoint4 : Contains 1 seat, 1 seat 0-ring, 1 stem and diaphragm assembly, 1 stem 0-ring, 1 cover 0-ring and 1 relief valve spring
BulletPoint5 : Please Note 1/2 Inch NPT Measures 0.840 Outside Thread Diameter in Inches. See Attached NPT Thread Chart.
Color : Black
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier1 : 0768643583976
ExternallyAssignedProductIdentifier2 : 768643583976
IncludedComponents : 1" 009M2 Total Relief Valve Repair Kit
ItemName : 887785 RK 009M2-VT Total Relief Valve Repair Kit Assembly for 1" LF009M2, 009M2 Backflow Preventers, 009 LF009 Reduced Pressure Zone Assemblies
ItemPackageDimensions_Height : 2.3 inches
ItemPackageDimensions_Length : 4.7 inches
ItemPackageDimensions_Width : 2.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-relief-valves
Manufacturer : TZDZ
Material : ABS, rubber and steel
MaximumOperatingPressure : 200 pounds_per_square_inch
ModelName : 0887785 RK 009M2-VT 1" 009M2 Total Relief Valve Repair Kit
ModelNumber : 0887785
NumberOfItems : 8
PartNumber : 0887785
ProductDescription : 0887785 RK 009M2-VT 1" 009M2 Total Relief Valve Repair Kit Assembly

- Compayibility: Suitable for 1" LF009M2, 009M2 Reduced Pressure Valve Assembly Backflow Preventers and Series 009 & LF009 Reduced Pressure Zone Assemblies.
- Replace OE Part Number: 0887785, 887785 RK, 009M2-VT
- Series: RK-009
- Package Include: 1 seat, 1 seat 0-ring, 1 stem and diaphragm assembly, 1 stem 0-ring, 1 cover 0-ring and 1 relief valve spring
- Material: ABS, rubber and steel
- Location: Between the retainer and cover
- Special Feature:
1. Excellent corrosion and water resistance, high strength performance.
2. Each part is manufactured to meets or exceeds OEM specifications, precision-engineered and tested to provide reliable replacement.
3. Easy to install with no special tools required. Save your charge.
4. Directly replace your old, worn out relief valve.

How to Replace:
1. Holding the bonnet, remove the four or six safety bonnet bolts.
2. Lift the cover straight up. The stem and diaphragm assembly usually remains with the cap when removed. At this time, the safety valve spring will be free in the body.
3. The safety valve seat is located at the bottom of the valve body hole. When replacing the safety valve diaphragm and/or disc, the safety valve module can be easily disassembled without special tools.
Notice
The disc rubber is molded into the disc holder and supplied as a disc holder assembly.
4. Reassemble the safety valve, press the seat firmly into the valve body, place the spring in the center of the seat, and insert the bonnet and safety valve block as a whole directly into the hole. Press down on the cover to ensure proper alignment. Insert and tighten the bolts.
Notice
If the cap does not sit flat on the body, the stem assembly will bend and damage may result. Re-align the stem and cap before inserting the bolts.

ProductSiteLaunchDate : 2023-08-04T07:00:00.000Z
SpecificationMet : asme code certified
Style : 200 PSI / 361 SCFM
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 8
UnspscCode : 40141600
ValveType : safety relief valve