Specification Brand : LECLOC BulletPoint1 : 3/4" NPT Thread Connection 【Attention】3/4” doesn't mean 3/4" diameter of the pipe thread. The outside thread diameter is 1.05” BulletPoint2 : 210°F (99°C), 150 PSI, Max 1.3 Mpa, 200,000 BTU/hr BulletPoint3 : Thickened Brass Body and Stainless Steel Pressure Spring with Epoxy-Coated Probe and Lever BulletPoint4 : Temperature and Pressure Safety Relief Valve for Water Heaters and Hot Water Storage Tanks, Which Is 3/4 Inch NPT Thread Size Connection BulletPoint5 : Side Tapping or Top Tapping Installation BulletPoint6 : 【WARM TIP】 Please open your tank water heater door to check the right size 1/2" or 3/4" NPT thread needed before ordering! As most returns so far have been "Ordered the wrong size". For example, Suburban some models such as 5243A, SW10DE need the 3/4" NPT thread size, while some need the 1/2" NPT thread size. Thank you! Color : Copper ConnectorType : Threaded ExteriorFinish : Brass ExternallyAssignedProductIdentifier1 : 810256030726 ExternallyAssignedProductIdentifier2 : 0810256030726 ExternallyAssignedProductIdentifier3 : 00810256030726 IncludedComponents : Relief Valve ItemName : 210°F 150 PSI Temperature and Pressure Relief Valve for Water Heater, Boiler and Hot Water Storage Tanks, Thickened Brass Body Auto Plumbing Fitting with Epoxy-Coated Probe and Lever, 3/4" NPT Thread ItemPackageDimensions_Height : 19.4056 centimeters ItemPackageDimensions_Length : 3.9116 centimeters ItemPackageDimensions_Width : 5.6896 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : industrial-relief-valves Manufacturer : LECLOC Material : Brass Material1 : Silicone Material2 : Brass MaximumOperatingPressure : 150 pounds_per_square_inch ModelName : 3/4" NPT Valve ModelNumber : 3/4" NPT Valve NumberOfItems : 1 PartNumber : 3/4 Inch NPT Threaded PressureRange : 22-80 pounds_per_square_inch ProductDescription : LECLOC T&P Safety Relief Valve Maintenance: After installing, the valve lever should be lifted at least once per year to make sure that the water-ways are unobstructed. Some naturally occurring mineral deposits may glue to the valve, blocking waterways, rendering it invalid. When manually operating the lever, hot water will drain .So please take all reasonable precautions to keep away from hot water. Before operating lever, check the discharge pipe which connecting the relief valve. Ensure that the hot water can flow into a proper place. Otherwise it may cause the personal injury. If no water draining out, it proves that the relief valve is unable to take effect. Please turn off the water heater immediately and call a professional to check the valve. ProductSiteLaunchDate : 2024-01-29T16:11:19.725Z SpecificationMet : UL StreetDate : 2017-09-18T00:00:01Z SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 1 UnspscCode : 40141600 ValveType : Pressure Relief Valve