Cart 2 india

Specification
Brand : Fiberglass Supply Depot
BulletPoint1 : Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)
BulletPoint2 : Partall Film #10, is resistant to solvents and styrene yet is water soluble. Protects against surface hang ups with polyester and vinylester resins; also used with epoxy and urethane resins.
BulletPoint3 : PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.)
BulletPoint4 : Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
BulletPoint5 : Now improved for easier lay out Same PVA as the green but this is clear
Color : Multi
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier : 8802933103313
ExternallyAssignedProductIdentifier1 : 0819794023085
ExternallyAssignedProductIdentifier2 : 819794023085
FinishType : Brushed
FlashPoint : 1.4 degrees_fahrenheit
Hazmat : 9
Hazmat1 : AEROSOLS
Hazmat10 : DE_LimitedQuantity
Hazmat11 : EG_LimitedQuantity
Hazmat12 : ES_LimitedQuantity
Hazmat13 : FR_LimitedQuantity
Hazmat14 : GB_LimitedQuantity
Hazmat15 : IN_GroundOnly
Hazmat16 : IT_LimitedQuantity
Hazmat17 : JP_GroundOnly
Hazmat18 : MX_LimitedQuantity
Hazmat19 : NL_LimitedQuantity
Hazmat2 : UN1950
Hazmat20 : PL_LimitedQuantity
Hazmat21 : SA_LimitedQuantity
Hazmat22 : SE_LimitedQuantity
Hazmat23 : SG_LimitedQuantity
Hazmat24 : TR_LimitedQuantity
Hazmat25 : US_ORMD
Hazmat26 : ZA_LimitedQuantity
Hazmat3 : 2.1
Hazmat4 : AE_LimitedQuantity
Hazmat5 : AU_LimitedQuantity
Hazmat6 : BE_LimitedQuantity
Hazmat7 : BR_LimitedQuantity
Hazmat8 : CA_LimitedQuantity
Hazmat9 : CN_GroundOnly
IncludedComponents : Aerosol Can, Lid
IncludedComponents1 : Mold Maintenance MR311 DRY FILM RELEASE AGENT
IncludedComponents2 : Mold Maintenance MR311 DRY FILM RELEASE AGENT
IncludedComponents3 : Mold Maintenance MR311 DRY FILM RELEASE AGENT
IncludedComponents4 : Mold Maintenance MR311 DRY FILM RELEASE AGENT
IncludedComponents5 : Mold Maintenance MR311 DRY FILM RELEASE AGENT
ItemDisplayDimensions_Height : 2.75 inches
ItemDisplayDimensions_Width : 2.75 inches
ItemForm : Liquid
ItemName : PVA - Clear PARTALL Film #10 Polyvinyl Alcohol (PVA) Quart
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : molding-release-agents
LiquidVolume : 14.2 fluid_ounces
LowerTemperatureRating : 1200 degrees_fahrenheit
Manufacturer : Partall
Material : Water Based
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : SC0311000
ModelNumber : 10
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : PVACQ
Pattern : Solid
PowerSourceType : ac
ProductDescription : PARTALL Film #10 is a water and alcohol based polyvinyl alcohol (PVA) coating comprised of solvent-resistant, film-forming materials. Once dry, the PVA film is resistant to solvents in the resin system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester, vinylester, or epoxy resins and various surfaces but may be used with most thermoset resins. PARTALL Film #10 is not recommended for use with substrates or resins (e.g., phenolics) containing water or giving off water during cure or with automotive finishes. PARTALL Film #10 parts easily from surface and is readily dissolved from parts and spray equipment with water.
ProductSiteLaunchDate : 2018-01-10T08:00:00.000Z
RecommendedUsesForProduct : Molding
RecommendedUsesForProduct1 : For Polishing
RecommendedUsesForProduct2 : For Paint Protection
SafetyDataSheetUrl : https://nabakemusa.com/downloads/sds/305-SDS-English.pdf
Size : One Size
SpecificUsesForProduct : Mold Release
SpecificUsesForProduct1 : BN High-Temp Dry Film Mold Release
SpecificUsesForProduct2 : BN High-Temp Dry Film Mold Release
SpecificUsesForProduct3 : BN High-Temp Dry Film Mold Release
SpecificUsesForProduct4 : BN High-Temp Dry Film Mold Release
SpecificUsesForProduct5 : BN High-Temp Dry Film Mold Release
Style : Akona Concrete Form Release (1 gal & 5 gal)
SupplierDeclaredDgHzRegulation : ghs
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TargetAudienceKeyword : Unisex Adult
UnitCount : 1
UnspscCode : 39120000
UpperTemperatureRating : -25 degrees_fahrenheit
WarrantyDescription : No Warranty