Cart 2 india

Specification
AirFlowCapacity : 105 cubic_feet_per_minute
Brand : THB
BulletPoint1 : HEAVY DUTY 3/8" FEMALE NPT IN LINE COMPRESSED AIR PRESSURE REGULATOR
BulletPoint2 : 215 PSI MAX INPUT PRESSURE, 150 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED
BulletPoint3 : ADJUSTABLE FROM 7 PSI TO 150 PSI, 105 SCFM FLOW RATE
BulletPoint4 : HIGH IMPACT LOCKING COMPOSITE KNOB
BulletPoint5 : 3/8" NPT OUTSIDE THREAD DIAMETER IN INCHES 0.675" LINEAR
Capacity : 105 cubic_feet_per_minute
ExternallyAssignedProductIdentifier1 : 687927981393
ExternallyAssignedProductIdentifier2 : 0687927981393
IncludedComponents : GAUGE, WALL BRACKET
ItemName : 3/8" IN-LINE COMPRESSED AIR PRESSURE REGULATOR, 7 TO 150 PSI ADJUSTABLE, BRACKET, GAUGE
ItemPackageDimensions_Height : 18.796 centimeters
ItemPackageDimensions_Length : 8.3058 centimeters
ItemPackageDimensions_Width : 8.3058 centimeters
ItemTypeKeyword : compressed-air-regulators
Manufacturer : T-H-B CO EDGE INDUSTRIAL
Material : Aluminum
MaximumOperatingPressure : 215 pounds_per_square_inch
MaximumPower : 0.2 horsepower
ModelNumber : R803N
MotorHorsepower : 0.2 horsepower
PartNumber : R803N
PowerSourceType : Battery Powered
ProductDescription : ADJUSTABLE FROM 7 PSI TO 150 PSI, 105 SCFM FLOW RATE A pressure regulator's primary function is to match the flow of gas through the regulator to the demand for gas placed upon it, whilst maintaining a constant output pressure. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. High pressure gas from the supply enters into the regulator through the inlet valve. The gas then enters the body of the regulator, which is controlled by the needle valve. The pressure rises, which pushes the diaphragm, closing the inlet valve to which it is attached, and preventing any more gas from entering the regulator. The outlet side is fitted with a pressure gauge. As gas is drawn from the outlet side, the pressure inside the regulator body falls. The diaphragm is pushed back by the spring and the valve opens, letting more gas in from the supply until equilibrium is reached between the outlet pressure and the spring. The outlet pressure therefore depends on the spring force, which can be adjusted by means of an adjustment knob.
ProductSiteLaunchDate : 2009-04-21T07:00:00.000Z
Style : Heavy duty
UnspscCode : 40150000