Cart 2 india

Specification
Brand : JESSINIE
BulletPoint1 : A Reed switch, also known as a reed tube, is an electrical switch operated by an applied magnetic field.
BulletPoint2 : A magnetic spring switch is sealed inside a glass tube by two magnetic springs (usually composed of two metals, iron and nickel).
BulletPoint3 : The two magnetic reeds are overlapping, but there is a small gap between them. An appropriate external magnetic field will cause the two magnetic reeds to come into contact.
BulletPoint4 : Maximum power: 6W
BulletPoint5 : Maximum switching voltage: 60VDC/VAC
ConnectivityProtocol : X-10
ConnectorType : Clamp
CurrentRating : 0.5 amps
DataTransferRate : 100 megabits_per_second
ExternallyAssignedProductIdentifier : 4055626833590
IncludedComponents : Switch
InterfaceType : RJ45
ItemName : JESSINIE 20PCS Glass Reed Switch Contact Normally Open (N/O) Magnetic Induction Switch 2.5mm×14mm 3Pin Glass Reed Relay Magnetic Induction Switch
ItemPackageDimensions_Height : 0.7 inches
ItemPackageDimensions_Length : 7.08 inches
ItemPackageDimensions_Width : 4.72 inches
ItemPackageQuantity : 1
ItemTypeKeyword : reed-switches
Manufacturer : JESSINIE
Material : Metal
ModelNumber : FL SWITCH 1008N
MountingType : PCB Mount
NumberOfItems : 20
NumberOfPorts : 8
OperatingVoltage : 60 volts
OperationMode : ON-ON
PackageLevel : unit
PartNumber : FL SWITCH 1008N
ProductDescription : Features
Maximum power: 6W
Maximum switching voltage: 60VDC/VAC
High voltage resistance: 60VDC/VAC
Maximum switching current: 0.25A
Maximum load current: 0.5A
Maximum contact resistance: 115M
Minimum insulation resistance: 2x107/2x109
Action time: 0.25ms
Bounce time: 0.05ms
Response frequency: 3000Hz
Sensitivity value: 10-20AT
Minimum reset sensitivity value: 5FT
Maximum contact capacitance: 2.0PF
Electrical life (load): 5x106 (50mV, 10mA)
Test coil number/resistance: 5000/600 ohms
Matters Needing Attention
1. Extreme care must be taken when cutting or bending the lead pins of the reed tube to avoid damage to the glass metal seal caused by improper stress. Proper clamping tools are necessary
2. Encountering temperature and prolonged exposure may cause damage to the glass metal seal (cracking, leakage, etc.), therefore it is necessary to use fast and reliable welding techniques (processes). The recommended welding conditions are: manual welding at. 280~300 ° C, and wave welding at 250~300 ° C.
ProductSiteLaunchDate : 2023-10-19T06:56:24.019Z
Size : 22.5mm Breite
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Temperature Switch
UnitCount : 20
UnspscCode : 39122200
Wattage : 6 watts