Cart 2 india

Specification
Brand : Drill America
BulletPoint1 : Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
BulletPoint2 : Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools; performance is similar to uncoated tools
BulletPoint3 : Round shanks allow use with a wide variety of toolholding systems
BulletPoint4 : When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
BulletPoint5 : Manufactured to National Aerospace standard 907
CuttingAngleString : 135.0 degrees
ExternallyAssignedProductIdentifier1 : 887861307567
ExternallyAssignedProductIdentifier2 : 0887861307567
FinishType : Silver
FinishType1 : Gold
FinishType2 : black
IncludedComponents : Drill Bit with 1/2" Shank
ItemDisplayDimensions_Height : 8 inches
ItemDisplayDimensions_Length : 8 inches
ItemDisplayDimensions_Width : 4 inches
ItemName : Drill America 18.50mm Reduced Shank Cobalt Drill Bit with 1/2" Shank, D/AMMCO Series
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : reduced-shank-drill-bits
Manufacturer : Drill America
Material : Cobalt
ModelNumber : D/AMMCO18.50
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 8
PackageLevel : unit
PartNumber : D/AMMCO18.50
Pattern : 135 split point reduced-shank drill bit
ProductDescription : Reaper Cobalt Drill Bits are constructed of a patented M42+ alloy consisting of 8% cobalt and high-molybdenum, increasing drill bit strength, rendering them super-friction-resistant and allowing for greater heat resistance when drilling the hardest and most demanding materials. These bits will cut more holes than most of our competitors, making the need to re-sharpen less frequent. Reaper Cobalt Drill bits feature a 135 degree split point eliminating the need for pilot hole predrilling or starter punching and making them particularly successful in cutting holes in harder grades of stainless steel and other material higher up on the Rockwell chart. Shanks have 3 machine-ground flats, which prevent slippage in drill chucks.
ProductSiteLaunchDate : 2023-02-03T18:19:42.086Z
Size : 18.50mm
Style : 1/2" Shank
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800