Cart 2 india

Specification
Brand : Bathrena
BulletPoint1 : ✔ Rebar Tier is a hand held machine used to pack rebars quickly.
BulletPoint2 : ✔ It is a miniature motor tool has the trait of safety and credibility.
BulletPoint3 : ✔ Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.
BulletPoint4 : ✔ Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.
BulletPoint5 : ✔ Compact size, lightweight, easy to grab. It can save 3-5 times than man power by hand.
Color : Orange
ExternallyAssignedProductIdentifier1 : 768517402495
ExternallyAssignedProductIdentifier2 : 0768517402495
FinishType : Polished
ItemForm : Coil
ItemName : Rebar Tying Machine Portable Rebar Tie Gun 8-34mm Rebar Tying Machine Automatic Steel Rod Tying Tool Handheld Rebar Tier Gun Steel Binding Tool with 2 Batteries US (Orange)
ItemPackageDimensions_Height : 21.6916 centimeters
ItemPackageDimensions_Length : 7.0104 centimeters
ItemPackageDimensions_Width : 14.5034 centimeters
ItemShape : Round Rod
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Bathrena
Material : Carbon Steel
ModelNumber : QTG-V1R-B74495
NumberOfItems : 1
PartNumber : 3159
ProductDescription :

Specifications：

Color:blue/orange（for choice）

Material: Plastic + Metal

Voltage: 12V

Battery: Lithium Ion Batteries

Battery Capacity: 4500 mAh

Battery Charging Time: 1.5 hours full filling

Tying Wire Diameter: 0.8mm

Tying Wire Length: more than 110 m

Applicable Scope Of Steel Strapping: 8mm - 34mm

Knot Wire Length: 300 - 500mm

Knot Number Per Charge: 1500 times

Knot The Required Time: 0.8 seconds at a time

Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.)

Package included:

1X Tying Machine

1X Pliers

1X Charger

1X Storage Box

2X Lithium Ion Batteries

1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)

 

Tying Wire Installations：

1. In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.

2. Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.

Note: Clench the wire plate when tear the packaging film, do not let the wire loose. If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.

3. Insert the head of the wire guide into the tap pipe until it is resisted.

4. Cover the plate and fasten the locking piece.

ProductSiteLaunchDate : 2022-07-25T08:20:00.572Z
RecommendedUsesForProduct : woven wire mesh, handicrafts, product packaging
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27110000