Cart 2 india

Specification
Brand : Yellulu
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Color : Blue
ExternallyAssignedProductIdentifier1 : 0759224629886
ExternallyAssignedProductIdentifier2 : 759224629886
GpsrSafetyAttestation : 1
IncludedComponents : 1X Tying Machine 1X Pliers 1X Charger 1X Storage Box 2X Lithium Ion Batteries 1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)
IncludedComponents1 : 1 * Hydraulic Rebar Cutter
IncludedComponents2 : 1 * Portable Box
IncludedComponents3 : 1 * Hex Key
IncludedComponents4 : 1 * Chinese and English Instruction
ItemName : Rebar Tie Gun, 8-34mm Rebar Tier Tying Machine, Electric Reinforcing Rebar Tier Gun, With Case and Rechargeable 1500Mah Battery, Automatic Rebar Tying Tool, With Pliers+ Charger, Blue
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 43 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : AOLIU
Material : Steel, Aluminum, Rubber, Plastic
Material1 : Plastic
Material2 : Metal
ModelName : Rebar Tie Gun
ModelNumber : Rebar Tie Gun
NumberOfItems : 1
PartNumber : Wisoquruht8d1ycw
PowerSourceType : Battery Powered
ProductDescription :

Specifications:

Color: Blue

Material: Plastic + Metal

Voltage: 12V

Battery: Lithium Ion Batteries

Battery Capacity: 1500 mAh

Battery Charging Time: 1.5 hours full filling

Tying Wire Diameter: 0.8mm

Tying Wire Length: more than 110 m

Applicable Scope Of Steel Strapping: 8mm - 34mm

Knot Wire Length: 300 - 500mm

Knot Number Per Charge: 1500 times

Knot The Required Time: 0.8 seconds at a time

Machine Size: 275 mm * 65 mm * 240 mm / 10.83''x2.56''x9.45''(appr.)

Tying Wire Installations:

1.  In the state of start-up, press the locking plate of the opening wire plate, open the plate cover.

2.  Take out the tying wire, tear the packaging film, pull straight wire head about 10 cm, load into the binding machine in the clockwise direction, the wire head into the guide tap tube.

Note: Clench the wire plate when tear the packaging film, do not let the wire loose.  If the wire is free to disperse, it will lead to the spread of the wire stuck in the wire plate.

3.  Insert the head of the wire guide into the tap pipe until it is resisted.

4.  Cover the plate and fasten the locking piece.

5.  Pinch the wire forward with two fingers, press and hold the switch and send the wire out.

6.  If you want to take out the wire plate when finished, press and hold the locking piece, open the wire plate cover plate, holding the wire tray to the side and pull out.

Package Includes:

1X Tying Machine

1X Pliers

1X Charger

1X Storage Box

2X Lithium Ion Batteries

1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)

ProductSiteLaunchDate : 2024-05-04T02:00:14.961Z
RegulatoryComplianceCertification : RSHSS.0635GD-004
Size : Tool Box Size: 42*10*30cm/16.54*3.94*11.81in
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700