Cart 2 india

Specification
Brand : NEWTRY
BulletPoint1 : ★APPLICATIONS--- It is suitable for the installation of power lines and substation projects in power transmission and transformation companies, low power bureaus and the vast power industry. During installation, iron bars, copper bars and aluminum bars can be cut into various forms required on site construction.
BulletPoint2 : ★EASY OPERATION--- After bending the copper bar, the pin can be pulled out and the work piece can be easily taken out without being affected by the length of the copper bar.
BulletPoint3 : ★DUST COVER--- When the female connector on the hydraulic pump is docked with the male connector on the bending machine (thread specification: ZG3 / 8 "), the plastic dust jacket can be screwed on the male connector to prevent dust from entering.
BulletPoint4 : ★WOODEN PACKING--- Packed in wooden box, shockproof and drop resistant.
BulletPoint5 : ★NOTE--- When bending the copper and aluminum row, the limit device can be adjusted according to the width of the copper row, so that the center position of the copper row is aligned with the center position of the piston, and then the bending can be performed.
Color : Yellow
ExternallyAssignedProductIdentifier : 7801375791585
ExternallyAssignedProductIdentifier1 : 197988585404
ExternallyAssignedProductIdentifier2 : 0197988585404
IncludedComponents : 1 X Acrylic Pvc Bending Machine Heater 1 X Water Pump 2 X Silicone Tubes 1 X Temperature Controller 1 X Water Thermometer
ItemName : NEWTRY CB-150D Hydraulic Bending Tool/Bender/Copper/Bus Bar Bender for 10MM max of sheet
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 19.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : NEWTRY
Material : Aluminum
ModelName : Manual Bending Machine
ModelNumber : Acrylic PVC Plastic Bender
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : CB-200A
PowerSourceType : Corded Electric
ProductDescription : Features:
1. Hydraulic Copper Busbar Bender is suitable for the bending of copper bar, bar, iron and other metal materials.
2. With the bending Angle, namely the scale.
3. The plate width will be measured by positioning device, bus won't bend after bending.
4. The pin can be opened at the moment of bending, the workpiece can be easily taken out after bending.
Technical Parameter
Bending force:16T
Cutting Thickness:3-10mm of copper sheet
Max width:150mm of copper sheet
Weight:17.5kg
Package:wooden case
Package size:400X195X295mm

ProductSiteLaunchDate : 2016-12-26T08:00:00.000Z
Size : 48"(1250mm)
Style : RC-25 Rebar Blades
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27110000
Voltage : 110 volts
Wattage : 1500 watts