Cart 2 india

Specification
Brand : AHULIN
BulletPoint1 : Sturdy and Durable: The product is made of high-quality aluminum alloy and carbon steel, using plastic spraying technology, with high strength, wear resistance, and long service life.
BulletPoint2 : Thoughtful Design: Its three-position ball design can make the product bend evenly to the highest end of the length of the straight plate, making the bending more stable and uniform without length limitations, and more suitable for bending metal roof leak plates and guide plates of houses, factories, etc.
BulletPoint3 : Elaborate and Accurate: With the V-shaped roller design, this product can clamp the material well during bending, reduce the error during bending, and improve your working efficiency.
BulletPoint4 : Adjustable Design: Knobs on the side easily secure the lift plate to ensure the desired bending height is achieved. The center roller station can also be adjusted independently to make mild-angled bends on a curve.
BulletPoint5 : Easy to Carry & Store: Compact (13.39*3.74*10.24 inches) and lightweight (9.7 lbs), this product allows you to carry it with you or store it in your boot without taking up too much space, so you can carry out your work at any time.
Color : Green
IncludedComponents : 1 x Tube Bender
IncludedComponents1 : 1* Bending Tool
IncludedComponents2 : 1* Handle
IncludedComponents3 : 2* Plugs
ItemName : Metal Edge Roller, Adjustable Edge Roller Metal Bending Tool,The 3-Station Edge Bead Roller for Bending Carbon Steel,Applicable Bending Angle 0-90°
ItemPackageDimensions_Height : 1.77 inches
ItemPackageDimensions_Length : 14.17 inches
ItemPackageDimensions_Width : 1.97 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Ahulin
Material : Aluminum Alloy, Carbon Steel
ModelName : Metal Edge Roller
ModelNumber : JZON27100
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZON27100
PowerSourceType : hand_powered
ProductDescription :

Description

This bending tool is not just an addition to your toolbox, it's a handy companion for your creative endeavors, making every bend stable and accurate. It is made of high-strength materials with a plastic spray treatment to ensure that the tool maintains its performance over a long period. Its lightweight and portable body is designed to work flexibly in the workshop, studio, or on-site. Choose it to unleash your creativity!

 

Details

Practical Handle: It has a comfortable grip and allows you to use or carry this product with ease.             

 

Clear Scale: It is easy for you to observe and adjust the bending width.

 

Round Corners: They care for your skin more than traditional square corners when you use and clean it.    

 

Application

This product is suitable for bending carbon steel and galvanized sheets and can be used for kiosks, garage splashbacks, gutter splash guards, roof splashbacks, outdoor storage, dog kennels, chicken coops, and more.

 

How to Use

1. Lock the lift plate to the shaft leg at the desired bend height to accurately align all drum depths.

2. Grasp the tool by the handle and slide it onto the edge of the material. Ensure that the material fits snugly against the bottom of the tool V-shaped roller assembly.

3. Gradually apply bending pressure while rolling the tool along the edge of the material each time bending the material upwards by approximately 10-20°. For a 90° bend, you should plan to have the tool run back and forth at least 5 to 8 times.

4. Allow the outer set of rollers to slide off the bend as you reach the end of the material and then reverse direction. This will produce a more uniform bend.

 

Specifications

Color: Green

Style: Modern

Material: Aluminum Alloy, Carbon Steel

Surface Treatment: Plastic Spraying

Mount Type: Freestanding

Control Type: Manual

Assembly Required: Yes

Applicable Bending Angle: 0-90°

Applicable Material Thickness: 0.3-1mm/ 0.012-0.04 in

Recommended Folding Height: 13-130mm/ 0.51-5.12 in

Product Size: 34*9.5*26cm/ 13.39*3.74*10.24 in

Package Size: 38*32*12cm/14.96*12.60*4.72 in          

Gross Weight: 4.7kg/ 10.36 lbs

Net Weight: 3.7kg/ 8.16 lbs

 

Package Included

1* Bending Tool

1* Handle

2* Plugs

 

Notes

1. We recommend that you wear protective gloves (not included) when handling to enhance safety in use.

2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. 

ProductSiteLaunchDate : 2024-07-11T07:39:20.910Z
Size : 13.78"x0.76"
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112500
Voltage : 12 volts
Wattage : 800 watts