Cart 2 india

Specification
Brand : Bryke Racing
BulletPoint1 : Interior Tin Tube Notcher
BulletPoint2 : Sets perfect 1-1/2" notch in sheet metal around your roll bar
BulletPoint3 : Notch interior tube quickly and easily
BulletPoint4 : Suitable for a maximum flat stock material thickness: 1/16" for 1" wide mild Steel or 3/16" For 1/2" wide mild Steel or 1/4" or 1/4” wide mild steel.
BulletPoint5 : Includes dies for 3/4, 1, 2, 3, and 4" diameter bends.
BulletPoint6 : Installs on any vise and also could and beds a variety of wires.
BulletPoint7 : Handles up to 3/8" solid materials.
BulletPoint8 : Forms round, square and flat stock. Shapes hooks, 'S' loops, and others.
BulletPoint9 : Bends 3/8, 1/2, 1, 1-1/2, and 2" radius.
Color : Orange
ExternallyAssignedProductIdentifier1 : 0685645518075
ExternallyAssignedProductIdentifier2 : 685645518075
FinishType : Polished
IncludedComponents : Tin Notcher Tool
ItemForm : Coil
ItemName : Interior Tin Tube Notcher 1-1/2" 1-1/2in 1.5 Sheetmetal Sheet metal tubing notch
ItemPackageDimensions_Height : 34.4 centimeters
ItemPackageDimensions_Length : 9.9 centimeters
ItemPackageDimensions_Width : 14.2 centimeters
ItemShape : Round Rod
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Bryke Racing
Material : Metal
ModelName : Interior Tin Tube Notcher 1-1/2" 1-1/2in 1.5 Sheetmetal Sheet metal tubing notch
ModelNumber : WEHWM238150
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZON8M3IWDWMT
PowerSourceType : hand_powered
ProductDescription : Easily Form Steel, Stainless, Aluminum Rod and Flat Stock: Put the right curves into your steel and aluminum rods using this small metal tubing bender. The tool mounts in your bench vise to create repeatable bends of 180 degrees or more in round, flat and square tubes. A rod forming tool is often used to create exhaust system hangers and brackets. It’s also great for hood prop rods, pegboard hooks, wire storage racks and ornamental metal art. The industrial design and construction produce strong leverage to complete the best in seconds. Use it on round stock with a diameter up to 3/8-inch or on ½-inch wide flat stock up to 3/16-inch thick.
ProductDescription1 : Interior Tin Tube Notcher
ProductDescription2 : Sets perfect 1-1/2" notch in sheet metal around your roll bar
ProductDescription3 : Notch interior tube quickly and easily
ProductSiteLaunchDate : 2022-10-18T16:31:42.898Z
RecommendedUsesForProduct : woven wire mesh, handicrafts, product packaging
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700