Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint : 1-5/8" Round tube rolls for RBM-40HV
BulletPoint1 : Size - Outer Diameter: 21.5mm / 0.85-inch, Total Length: 550mm / 21.65-inch, Suit PVC Pipe Inner Dia: 25mm / 0.98-inch, 1 x PVC spring bender
BulletPoint2 : Material - The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.
BulletPoint3 : Feature - Can be used with heat gun, it fits 1 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.
BulletPoint4 : Application - Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.
BulletPoint5 : Notice - The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
BulletPoint6 : Replaceable blade (Order replacement blade #20-07)
BulletPoint7 : Insulated non-slip rubber handle grips for safety, comfort, and control.
BulletPoint8 : NOTE: Do not cut EHS guy wire
BulletPoint9 : For over 45 years Huskie Tools has been dedicated to developing innovative solutions to help linemen safely and efficiently perform some of the most dangerous and demanding jobs on the planet.
Color : BLUE
ExternallyAssignedProductIdentifier : 7426873922622
ExternallyAssignedProductIdentifier1 : 0657808752183
ExternallyAssignedProductIdentifier2 : 657808752183
ExternallyAssignedProductIdentifier3 : 00088381587594
FinishType : Polished Chrome Plating
IncludedComponents : 7/8" x 4" Rebar Cutter Drill Bit (Head Only)
ItemName : HARFINGTON PVC Pipe Bending Spring 21.5mm OD 550mm Long Tube Bending Spring Pipe Bender Spring PVC Pipe Bender for PVC Pipe Bending Devices in Home Hydropower, Blue
ItemPackageDimensions_Height : 1.06 inches
ItemPackageDimensions_Length : 11.42 inches
ItemPackageDimensions_Width : 5.12 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : HARFINGTON
Material : spring steel
ModelName : Slip Rolling Bending Machine
ModelNumber : RH-230
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : hta230414hh0849
PowerSourceType : Manual
ProductDescription : 1. The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.

2. Can be used with heat gun, it fits 1 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.

3. Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.

4. The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
ProductSiteLaunchDate : 2023-06-10T11:15:17.428Z
Size : 21.5mmx550mm
Style : 1-5/8"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WarrantyDescription : 1