Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Outer Diameter: 17.2mm / 0.68-inch, Total Length: 1000mm / 39.37-inch, Suit PVC Pipe Inner Dia: 20mm / 0.79-inch, 1 x PVC spring bender
BulletPoint2 : Material - The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.
BulletPoint3 : Feature - Can be used with heat gun, it fits 3/4 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.
BulletPoint4 : Application - Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.
BulletPoint5 : Notice - The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
Color : Green
ExternallyAssignedProductIdentifier1 : 0045242587506
ExternallyAssignedProductIdentifier2 : 045242587506
IncludedComponents : Cutter
IncludedComponents1 : 1* Bending Tool
IncludedComponents2 : 1* Handle
IncludedComponents3 : 2* Plugs
ItemName : HARFINGTON PVC Pipe Bending Spring 17.2mm OD 1000mm Long Tube Bending Spring Pipe Bender Spring PVC Pipe Bender for PVC Pipe Bending Devices in Home Hydropower, Blue
ItemPackageDimensions_Height : 29.8 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 12.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : HARFINGTON
Material : spring steel
ModelName : ST
ModelNumber : YYQ-WWHTJ-US014@AJJUSDN02
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : hta230414hh0858
PowerSourceType : corded-electric
ProductDescription : 1. The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.

2. Can be used with heat gun, it fits 3/4 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.

3. Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.

4. The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
ProductSiteLaunchDate : 2023-06-10T11:15:06.490Z
Size : 17.2mmx1000mm
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27110000
Voltage : 12 volts
Wattage : 800 watts