Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint : Plastic Pipe & Hose Cutter
BulletPoint1 : Size - Outer Diameter: 21.5mm / 0.85-inch, Total Length: 1000mm / 39.37-inch, Suit PVC Pipe Inner Dia: 25mm / 0.98-inch, 2 x PVC spring bender
BulletPoint2 : Material - The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.
BulletPoint3 : Feature - Can be used with heat gun, it fits 1 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.
BulletPoint4 : Application - Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.
BulletPoint5 : Notice - The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
BulletPoint6 : Use to Clear Out Stoppages, Roots, Rags and Sticks
BulletPoint7 : Easy Snap-on Attachment to Cables
Color : Blue
ExternallyAssignedProductIdentifier1 : 078864930559
ExternallyAssignedProductIdentifier2 : 0078864930559
ExternallyAssignedProductIdentifier3 : 00715253000591
FinishType : Powder Coated
IncludedComponents : 1 pipe cutter
ItemName : HARFINGTON 2pcs PVC Pipe Bending Spring 21.5mm OD 1000mm Long Tube Bending Spring Pipe Bender Spring PVC Pipe Bender for PVC Pipe Bending Devices in Home Hydropower, Blue
ItemPackageDimensions_Height : 28.4 centimeters
ItemPackageDimensions_Length : 5.9 centimeters
ItemPackageDimensions_Width : 25.3 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : HARFINGTON
Material : spring steel
MeasurementSystem : Metric
ModelName : T-112 Spear Cutter
ModelNumber : HSSVGRMM
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Mechanical
PackageLevel : unit
PartNumber : hta230414hh0901
PowerSourceType : hand_powered
ProductDescription : 1. The PVC pipe bender is forged from spring steel, the surface is zinc plated, anti-rust, durable, wear-resistant, long service life, and easy to use.

2. Can be used with heat gun, it fits 1 inch PVC conduit pipe. It is suitable for bending PVC pipes in home decoration, and pipe treatment for household water and electricity.

3. Select a pipe bender of appropriate size to insert into the PVC pipe, bend the pipe bender to the desired angle, wait for a few minutes, and pull out the pipe bender after the pipe does not spring back. The bending angle is controlled above 90 degrees.

4. The spring pipe bender should not be smaller than half the inner diameter of the PVC pipe, in case of tangle up and cannot be used.
ProductSiteLaunchDate : 2023-06-10T11:14:58.034Z
Size : 21.5mmx1000mm
Style : Ergonomic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1