Benders Tools 24" Portable Acrylic Plastic PVC Bending Machine Heater Hot Heating Bender Temperature Adjustable for Acrylic, Organic Board, Pvc And Various Thermoplastic Materials

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 18700/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : PuminbLux
BulletPoint : Product Type: Accessory
BulletPoint1 : Temperature adjustable- Product temperature is uniform, water circulation cooling.
BulletPoint2 : Portable - Light and practical. Space-saving, hot bending of plastic sheets of various materials, such as thickness more than 6 mm.
BulletPoint3 : Can be heated up and down simultaneouslyby two heaters.
BulletPoint4 : Can be combined with multiple heaters to heat multiple bending points at one time.
BulletPoint5 : If bending thick plates, slotting bending, bending angle will be more beautiful, you can adapt to local conditions, flexible use.
BulletPoint6 : Can be combined with the worktable into a hot bending machine, can also be used alone.
BulletPoint7 : There iswater circulation cooling on both sides of the heating tube to ensure that there will be no thermal deformation except where heating is needed.
Color : Orange
ExternallyAssignedProductIdentifier : 9086067720571
ExternallyAssignedProductIdentifier1 : 0756804689506
ExternallyAssignedProductIdentifier2 : 756804689506
IncludedComponents : 1x Tying Machine, 1x Pliers, 1x Charger, 1x Storage Box, 2x Lithium Ion Batteries
IncludedComponents1 : 1 X Acrylic PVC Bending Machine Heater
IncludedComponents2 : 1 X Water Pump
IncludedComponents3 : 2 X Silicone Tubes
IncludedComponents4 : 1 X Temperature Controller
IncludedComponents5 : 1 X Water Thermometer
ItemName : Benders Tools 24" Portable Acrylic Plastic PVC Bending Machine Heater Hot Heating Bender Temperature Adjustable for Acrylic, Organic Board, Pvc And Various Thermoplastic Materials
ItemPackageDimensions_Height : 6.7 inches
ItemPackageDimensions_Length : 28.5 inches
ItemPackageDimensions_Width : 7.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : PuminbLux
Material : Plastic, Metal
ModelName : 24" Portable Acrylic Plastic PVC Bending Machine
ModelNumber : HG-WMTZXL-1561-US
NumberOfItems : 1
PartNumber : 1
PowerSourceType : Corded Electric
ProductDescription :

Specifications:

Input voltage: AC 110V

Heating peak: ZW-300 420 ℃, the other 250 ℃

Bending material thickness: 1mm-6mm

Heating width: 10-60 cm

Power: 800W

Package Dimensions (L x W x H): 87*20*12cm

Main uses:

Widely used in decoration engineering, sign making, display cabinets, aquarium wrapping, lighting LED channel letters, supermarket shelves, curtain walls, large light boxes, etc

Applicable materials:

acrylic, organic board, PVC and various thermoplastic materials

Packages:

1 X Acrylic PVC Bending Machine Heater

1 X Water Pump

2 X Silicone Tubes

1 X Temperature Controller

1 X Water Thermometer

Instructions:

Keep a cooling tank (barrel) of more than 30 liters.      First, connect the heater body and the submersible pump with a silicone hose.      Place the submersible pump in the cooling bucket, connect the power supply of the pump, and wait for the water to circulate out.      (Note: The water temperature of the machine will keep rising for a long time.      Please replace the cold water clearly.      The temperature of the circulating water should not drop abruptly.      When the water temperature exceeds 50 degrees, the power supply of the heater should be cut off in time, and the circulating water should be replaced later.)

Connect the thermostat with the hot bender and connect it to 110V power supply.      Adjust the knob of the thermostat controller.      The clockwise direction is to raise the temperature, and vice versa.      When adjusting, it is not appropriate to rotate too fast in order to avoid damaging the thermostat.      (Note: It is advisable to slowly adjust the thermostat to a reddish heat pipe.      Excessive temperature will cause damage to the hot bending material and affect the service life of the hot bender).

When the heating pipe reaches the required temperature, it can place the plastic sheet which needs to be hot-bended on the heating trough.      When the sheet is soft enough to be folded manually, it can bend at various angles.      According to the different materials, the setting time is different.      Please determine the setting time according to the actual situation.

Safety precautions:

Product heating produces high temperature, heating components should avoid contact with human skin.

Please pay attention to the use of the environment, away from inflammable and explosive goods.

If you don't use it for a long time, please cut off the power in time.

If you have any questions, please feel free to contact us and we will get back to you as soon as possible, thank you for your support.

Description


ProductSiteLaunchDate : 2024-06-29T02:24:56.789Z
Size : 25.59*7.09*22.05 in
Style : Simple
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112500
Voltage : 12 volts

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.