Cart 2 india

Specification
Brand : MONIPA
BulletPoint1 : Safety Water Circulation Cooling: There is water circulation cooling on both sides of the plastic sheet bender heating tube to ensure that there will be no thermal deformation except where heating is needed
BulletPoint2 : Plastic Bender Applicable Materials: Acrylic, organic board, PVC and various thermoplastic materials
BulletPoint3 : Work In Pair: If the thickness of acrylic material is beyond 0.24" (6 mm), you can choose to apply two plastic bending strip heater to heat both top and bottom of the material at the same time
BulletPoint4 : Acrylic Bending Machine Application: Widely used in decoration engineering, sign making, display cabinets, aquarium wrapping, lighting LED channel letters, supermarket shelves, curtain walls, large light boxes, etc
BulletPoint5 : Service: If you have any questions, please contact us in a timely manner, and we will serve you online 24/7
ExternallyAssignedProductIdentifier1 : 752870957952
ExternallyAssignedProductIdentifier2 : 0752870957952
IncludedComponents : No
ItemLength : 6 inches
ItemName : Acrylic PVC Plastic Bender Machine 110V Plastic Sheet Bender Manual Strips Heater for Plastic Bending Tool 1mm-6mm Thickness, Sign Making (11.82")
ItemPackageDimensions_Height : 20.8 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 20.3 centimeters
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : MONIPA
Material1 : Metal
Material2 : Iron
ModelName : Acrylic Bending Machine
ModelNumber : 11.82"
NumberOfPieces : 1000
PartNumber : ‎DAY-Cunno-568
PowerSourceType : 1
ProductDescription :

Power Supply: 110V, 60 Hz

Power: 300W

Maximum Bending Width: 11.82"

Heating Slot Width: 0.3"

Heating Thickness: 0.04" - 0.24" (1 - 6 Mm)

Product Size: 30*5*4cm(11.82*2*1.6inch)

Net Weight:2.5 Kg

Gross Weight: 2.8Kg

Package Dimensions (L x W x H): 87*20*12cm

Packages:

1 X 11.82 Inch Acrylic Pvc Bending Machine Heater

1 X Water Pump

2 X Silicone Tubes

1 X Temperature Controller

1 X Water Thermometer

Instructions:

Keep a Cooling Tank (Barrel) Of More Than 30 Liters. First, Connect The Heater Body And The Submersible Pump With a Silicone Hose. Place The Submersible Pump In The Cooling Bucket, Connect The Power Supply Of The Pump, And Wait For The Water To Circulate Out. (Note: The Water Temperature Of The Machine Will Keep Rising For a Long Time. Please Replace The Cold Water Clearly. The Temperature Of The Circulating Water Should Not Drop Abruptly. When The Water Temperature Exceeds 50 Degrees, The Power Supply Of The Heater Should Be Cut Off In Time, And The Circulating Water Should Be Replaced Later.)

Connect The Thermostat With The Hot Bender And Connect It To 220V Power Supply. Adjust The Knob Of The Thermostat Controller. The Clockwise Direction Is To Raise The Temperature, And Vice Versa. When Adjusting, It Is Not Appropriate To Rotate Too Fast In Order To Avoid Damaging The Thermostat. (Note: It Is Advisable To Slowly Adjust The Thermostat To a Reddish Heat Pipe. Excessive Temperature Will Cause Damage To The Hot Bending Material And Affect The Service Life Of The Hot Bender).

When The Heating Pipe Reaches The Required Temperature, It Can Place The Plastic Sheet Which Needs To Be Hot-Bended On The Heating Trough. When The Sheet Is Soft Enough To Be Folded Manually, It Can Bend At Various Angles. According To The Different Materials, The Setting Time Is Different. Please Determine The Setting Time Accord
ProductSiteLaunchDate : 2021-12-27T11:06:57.275Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111500
Voltage : 110 volts