Cart 2 india

Specification
Brand : SHONFYVS
BulletPoint1 : ✶【Durable Material】: The machine is made of hard cast iron, which has rust prevention ability. Its blades are made of Cr 12 MoV with good hardness, so you can use it for a long time and still bring you better cutting results! Rebar Cutter has a scientific exhaust hole design at the rear, which greatly improves the heat dissipation of the machine, making it more stable in operation while also extending its service life.
BulletPoint2 : ✶【All-copper Motor】: The 800W pure copper coil motor driven by a hydraulic pump ensures the stability of the electric rebar cutter, which means Electric Rebar Cutter has excellent power and low noise to cut at lightning speed! it can cut the steel for you in 2.5-3 seconds, which improves your work efficiency.
BulletPoint3 : ✶【High Portability】: We provide a protective case with a handle for your electric rebar cutter and its proper weight for your daily use. And the interior of the protective case with foam lining can well prevent the machine from damage due to impact. portable electric rebar cutter rear handle and side handle are ergonomically designed to give you a comfortable grip and convenient operation, bringing you a better experience.
BulletPoint4 : ✶【 Good Safety】: Rebar Cutter can cut rebar in the size range of 4-16mm (3/20""-5/8"") for you, which can meet your various cutting needs. Compared with the traditional steel cutting method, the use of this product does not produce sparks and is without smell, bringing you a safer cutting operation. 
BulletPoint5 : ✶【 Wide Applicability】: The Cutter on its headstock is reversible on four sides and the cutter on the shaft can be reversible on two sides. And the adjustable bolt design makes it easy to cut different sizes of steel with hardness below 25.
Color : Gray, Green
CuttingAngle : 90 degrees
ExternallyAssignedProductIdentifier : 6955610079868
ExternallyAssignedProductIdentifier1 : 0759224604999
ExternallyAssignedProductIdentifier2 : 759224604999
IncludedComponents : 1* Electric Rebar Cutter 1* Protective Case 1* Oiil Jug 1* Handle 2* Blades Other Needed Accessories
IncludedComponents1 : 1 * Manual Bead Roller
IncludedComponents2 : 6 Sets* Dies
IncludedComponents3 : 1* Hydraulic Rod
IncludedComponents4 : 2* Screws
ItemName : 800W Electric Rebar Cutter Cutting Up To 5/8 Inch 4-16mm Rebar Electric Hydraulic Dedicated With Replaceable Jaw Blades Cutting Speed 2.5-3.0S (800W RC-16)18.1 * 5.1 * 4.5in
ItemPackageDimensions_Height : 55.626 centimeters
ItemPackageDimensions_Length : 17.018 centimeters
ItemPackageDimensions_Width : 24.384 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : SHONFYVS
Material : Cast Iron Machine, Cr 12 MoV Blade
Material1 : Aluminum
Material2 : Iron
ModelName : Electric Rebar Cutter
ModelNumber : RC-16
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Electric Rebar Cutter
PowerSourceType : Corded Electric
ProductDescription :

Package  Included

        1* Electric Rebar Cutter

        1* Protective Case

        1* Oiil Jug

        1* Handle

        2* Blades

        Other Needed Accessories

Specification

Model: RC-16

Color: Gray, Green

Use: Cutting off Steel Bars

Material: Cast Iron Machine, Cr 12 MoV Blade

Hydraulic Oiil Type: 46# Hydraulic Oiil（Not Included）

Plug Voltage: U.S. Plug 110V

Power: 800W

Power Cord Length: 2.5m/ 8.2ft

Cutting Range: 4-16mm (3/20"-5/8")

Cutting Speed: 2.5-3s

Product Size: 46*13*11.5cm/ 18.1*5.1*4.5in

Package Size: 51.5*16*22.5cm/ 20.28*6.3*8.86in

Net Weight: 8kg/ 17.64lbs

Gross Weight: 13kg/ 28.66lbs

Notes

1. Please place Electric Hydraulic Dedicated Bender horizontally on the headstock before use with the rebar at an angle of 90° to the central axis of the headstock.

2. Please do not use Rebar Cutters to cut materials that exceed the specified diameter or strength, as this may affect the service life of the machine.

3. Please release the switch immediately after cutting to the end to avoid damage to the machine by keeping the switch pressed.

4. Portable electric rebar cutter is normal for the pump body to heat up after being cut off about 50 times continuously, please wait until the pump body cools down to normal temperature before using.

5. Please periodically check whether the head frame, pump body, and other connections of the nut are loose, if loose, need to tighten, so as not to affect the use of the machine.

6. Please change the hydraulic oiil every six months.

ProductSiteLaunchDate : 2024-05-29T03:57:43.665Z
Size : 18.1*5.1*4.5in
SpecificUsesForProduct : Gripping
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Cast Iron
UnitCount : 12800
Voltage : 110 volts
Wattage : 800 watts