Cart 2 india

Specification
Brand : GOSHET
BulletPoint1 : 【Adjustable temperature】:Uniform product temperature, water circulation cooling. Can be heated up and down at the same time by two heaters. Can be combined with several heaters to heat several bending points at a time.
BulletPoint2 : 【Lightweight and practical】:Space-saving, can be combined with a workbench to form a hot bending machine, or can be used alone. Hot bending of plastic sheets of various materials, such as thicknesses greater than 6mm.
BulletPoint3 : 【Scientific design】:If the plate thickness bending, slot bending, bending angle will be more beautiful, can be adapted to local conditions, flexible use.
BulletPoint4 : 【Safe and stable】:Water circulation cooling on both sides of the heating tube to ensure that no thermal deformation will occur in addition to the need to heat the place.
BulletPoint5 : 【Complete accessories】:The whole machine is connected to the power supply and water pipe at both ends respectively. Hydraulic separation is safe and intuitive, easy to plug and unplug, easy to collect and easy to assemble on the workbench.
BulletPoint6 : Only includes Smooth Dowels
BulletPoint7 : Slim handle allows for easy access into tight spaces
BulletPoint8 : 3-Piece Set: 14″ Standard Handle (Smooth Dowels 1.3 lbs.) & 14″ Pro-Handle (Smooth Dowels 1.4 lbs.) w/11″ Adapter Bar (Smooth Dowels 1.1 lbs.)
Color : Sliver
ExternallyAssignedProductIdentifier1 : 0694577383392
ExternallyAssignedProductIdentifier2 : 694577383392
IncludedComponents : 1 X Acrylic Pvc Bending Machine Heater 1 X Water Pump 2 X Silicone Tubes 1 X Temperature Controller 1 X Water Thermometer
ItemName : 48" Acrylic PVC Bending Machine, 1500W 110V 1-6MM Thickness Plastic Sheet Bender Manual Strips Heater Hot Heating Bender Bending Tool for Decoration Engineering Sign Making
ItemPackageDimensions_Height : 39.8018 centimeters
ItemPackageDimensions_Length : 13.208 centimeters
ItemPackageDimensions_Width : 32.1056 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Gdrockpond
Material : metal
ModelName : style
ModelNumber : dsds4d10dsdsd
NumberOfItems : 1
PartNumber : Bewinnery41k9b8q3t
PowerSourceType : ac
ProductDescription :

Specifications:

Input Voltage: Ac 110V

Heating Peak: Zw-300 420 ℃, The Other 250 ℃

Heating Bending Thickness: 1-6mm

Heating Port Width: 8mm

Effective Heating Length: 1220 Mm

Power: 1500W

Product Size：Approx.135*4*4cm/53.1*1.6*1.6in

Net Weight:4kg

Gross Weight: 4.5kg

Package Dimensions (L x W x H): 147*20*12cm

Instructions:

Keep a Cooling Tank (Barrel) Of More Than 30 Liters.    First, Connect The Heater Body And The Submersible Pump With a Silicone Hose.    Place The Submersible Pump In The Cooling Bucket, Connect The Power Supply Of The Pump, And Wait For The Water To Circulate Out.    (Note: The Water Temperature Of The Machine Will Keep Rising For a Long Time.    Please Replace The Cold Water Clearly.    The Temperature Of The Circulating Water Should Not Drop Abruptly.    When The Water Temperature Exceeds 50 Degrees, The Power Supply Of The Heater Should Be Cut Off In Time, And The Circulating Water Should Be Replaced Later).

Connect The Thermostat With The Hot Bender And Connect It To 220V Power Supply.    Adjust The Knob Of The Thermostat Controller.    The Clockwise Direction Is To Raise The Temperature, And Vice Versa.    When Adjusting, It Is Not Appropriate To Rotate Too Fast In Order To Avoid Damaging The Thermostat.    (Note: It Is Advisable To Slowly Adjust The Thermostat To a Reddish Heat Pipe.    Excessive Temperature Will Cause Damage To The Hot Bending Material And Affect The Service Life Of The Hot Bender).

When The Heating Pipe Reaches The Required Temperature, It Can Place The Plastic Sheet Which Needs To Be Hot-Bended On The Heating Trough.    When The Sheet Is Soft Enough To Be Folded Manually, It Can Bend At Various Angles.    According To The Different Materials, The Setting Time Is Different.    Please Determine The Setting Time According To The Actual Situation.

Packing List:

1 X Acrylic Pvc Bending Machine Heater

1 X Water Pump

2 X Silicone Tubes

1 X Temperature Controller

1 X Water Thermometer

ProductSiteLaunchDate : 2024-07-24T08:04:12.532Z
Size : 53.1*1.6*1.6in
Style : Manual
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112500
Voltage : 110 volts
Wattage : 1500 watts