Cart 2 india

Specification
Brand : Ynomdusa
BulletPoint1 : Rebar Tying Tool: The adjustable head positioning sleeve can clamp the steel bars to ensure firm and high-precision bundling, making this machine suitable for 1-2-inch steel bands to meet your daily bundling needs.
BulletPoint2 : High Efficiency: The built-in pure copper brush motor, precise microcontroller, and high-quality binding wire allow 1500 knots to be tied when fully charged, and can be completed in just 0.8 seconds for each, saving 3-5 times more manpower than manual labor. Meanwhile, it adopts a bipolar quasi-force structure, which can easily achieve buckle connection between steel packaging belts without the need for fasteners.
BulletPoint3 : Cordless and Convenient: The cordless design makes it easy for you to work outdoors. And the ergonomic handle with anti-slip patterns ensures a comfortable grip for a long time without hand soreness, allowing you to operate with one hand.
BulletPoint4 : Automatic Cutting: After tying, the machine will automatically cut the tape and prepare it in time for the next operation. If you encounter a strap stuck at the exit, you can use the plier in the packaging to pull it out.
BulletPoint5 : Long Endurance: Two lithium-ion batteries with a large capacity (13200Mah) can support this machine to operate for approximately 8 hours when fully charged, meeting your long-term bundling needs.
Color : Orange
ExternallyAssignedProductIdentifier1 : 0753781773693
ExternallyAssignedProductIdentifier2 : 753781773693
IncludedComponents : 1* Rebar Tying Machine 1* Plier 1 Roll* Tying Wire (Already Installed） 1* Charger 2* Lithium-ion Batteries 1* Toolbox 1* English Manual
ItemDisplayDimensions_Height : 2.56 inches
ItemDisplayDimensions_Length : 12.01 inches
ItemDisplayDimensions_Width : 3.15 inches
ItemDisplayWeight : 0.99 pounds
ItemName : 30-60mm Automatic Rebar Tying Machine, 12V Handheld Rebar Tier Tool with Pliers + 2 x Batteries, Rebar Tier Tying Machine for Steel Bar Rod Tying Binding, Building Tying, Orange
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 12.6 inches
ItemPackageDimensions_Width : 3.54 inches
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Ynomdusa
Material : Plastic, Metal
ModelName : Rebar Tying Machine
ModelNumber : 30-60mm Automatic Rebar Tying Machine
NumberOfItems : 1
PartNumber : 94Khongminh43h2029189
PowerSourceType : Battery Powered
ProductDescription :

Description

Binding steel bars on the construction site is tiring and slow, perhaps you need a machine to help improve work efficiency. This rebar-tying machine offers a great solution to this problem. Made of high-quality plastic and metal, it is strong and durable. It can achieve efficient binding without the need for fasteners. Meanwhile, the ergonomic handle allows for a comfortable grip. It is your ideal choice. 

Details

Heat Dissipation Holes: There are heat dissipation holes on the top of the product, which can dissipate heat in time and prolong the service life of this product.

Winding Reel: It can facilitate loading wires while providing additional balance for the machine. The clear winding coil cover can prevent debris from entering.

Indicator Light: It lights up after the switch is turned on, making it easy for you to grasp the usage status of the product. 

Practical Toolbox: The toolbox with customized grooves makes it easy for you to organize the machine and accessories to avoid losing them. Meanwhile, the recessed handle at the top allows you to easily move the toolbox.

Application

It is suitable for bundling steel bars and can be widely used in construction sites, large bridges, highways, railways, tunnels, mining construction, farms, garden fences, floor pipelines, heating floor nets, etc.

Specification

Model: JS-980

Color: Orange

Material: Plastic, Metal

Type: American Standard

Power Source: Battery Powered

Motor Type: Pure Copper Brush Motor

Battery Type: 12V Lithium-ion Battery

Battery Capacity: 13200Mah

Usage Time On a Full Charge (Each Battery): About 4h (1500 Times)

Battery Full Charging Time: 1.5h

Tying Wire Length: 110m/360ft

Tying Wire Diameter: 0.8mm/0.03inch

Tool Type: Tier Tying Machine

Applicable Scope of Steel Strapping: 30-60mm/1-2inch

Knot Wire Length: ≥40cm/15inch

Number of Knots (Single Fully Charge): 1500

Required Knot Time: 0.8s Per Time

Cable Length: About 95cm/37.4inch

Machine Size: About 31*6.8*25.5cm/12*2.6*10inch

Toolbox Size: 42*29*11cm/16.5*11.4*4.3inch

Operation Instruction

1. The rebar tire's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45-degree angles. (Note: There should be no obstacles between the pliers and the wire. )

2. Press the start switch, and the rebar tier machine carries on the work (spins, hinges tightly, cuts off). (Note: Press one button at a time, do not probe the jaws at work.)

3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.

4. When the binding process is not completed, do not unplug the machine in advance, otherwise, it will cause the bundling of the goods tied to the skid.

Maintenance

1. Clean the machine regularly and keep the wire mouth clean.

2. This product can not be placed randomly to avoid damage to parts.

3. Batteries must not be placed together with other metal objects to avoid short circuits.

4. Non-professional personnel are not allowed to disassemble the machine randomly to avoid damage.

5. When you encounter an unresolved failure, please give it to a professional repair.

Package Included

1* Rebar Tying Machine

1* Plier

1 Roll* Tying Wire (Already Installed）

1* Charger

2* Lithium-ion Batteries

1* Toolbox

1* English Manual

ProductSiteLaunchDate : 2025-04-09T02:47:32.546Z
Size : 30.50X8.00X6.50CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112500