Cart 2 india

Specification
Brand : Generic
BulletPoint1 : It use lever and parallel pressure to bend sharp and round angle with precise folding postion.
BulletPoint2 : It can bend metal strip below height 50mm,thickness 0.5mm.
BulletPoint3 : The pressure point can be adjusted according to material thickness which make it easy to make perfect metal channel letters
BulletPoint4 : 【One Button Operation】：Ergonomic back grip design of our rebar bender tool facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward
BulletPoint5 : 【Precision Pressure Relief Valve】: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position
Color : Stainless Steel
ExternallyAssignedProductIdentifier1 : 768430601456
ExternallyAssignedProductIdentifier2 : 0768430601456
IncludedComponents1 : 1 x electric steel bar bending machine
IncludedComponents2 : 1 x oil tank
IncludedComponents3 : 1 x 5mm Allen key,1 x 6mm Allen key,1 x 8mm Allen key
IncludedComponents4 : 1 x extra carbon brush
IncludedComponents5 : 1 x set of oil seal
ItemName : 2" (50mm) Penguin Manual Metal Strip Bending Plier, Right Angle
ItemPackageDimensions_Height : 73.152 centimeters
ItemPackageDimensions_Length : 22.352 centimeters
ItemPackageDimensions_Width : 29.972 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Sign-in-China
Material : aluminum alloy
Material1 : Aluminum
Material2 : Stainless Steel
ModelName : HRB-22
ModelNumber : HRB-22
NumberOfItems : 1
PartNumber : sic-19278
PowerSourceType : AC plug-in power supply
ProductDescription : Discription:
Meterials Thickness: ≤0.5mm stainless steel strip; ≤0.6mm galvanized strip; ≤0.7mm aluminum strip.

Features:
1. It use lever and parallel pressure to bend sharp and round angle with precise folding postion.
2. It can bend metal strip below height 50mm,thickness 0.5mm.
3. The pressure point can be adjusted according to material thickness which make it easy to make perfect metal channel letters

ProductSiteLaunchDate : 2016-10-26T07:00:00.000Z
SpecificUsesForProduct : Bending
Style : 1200W Electric Rebar Bender
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700
Voltage : 110 volts_of_alternating_current
Wattage : 1200 watts