Cart 2 india

Specification
Brand : Tefola
BulletPoint1 : Copper tube bender can be bent without kinking or collapse, Bender's calibration mark can be bent 45˚ to 90˚.
BulletPoint2 : Copper pipe bender lightweight and hand-held design, it is more convenient and quick to use, saving time and effort, Processed with high-quality materials of aluminium alloy, wear-resistant, high-temperature resistant, and have a long service life.
BulletPoint3 : Brake line bending tool suitable for 1/8 inch (3mm), 3/16 inch (4mm), 1/4 inch (6mm) small tubes.
BulletPoint4 : Suitable for automobile fuel pipes and air-conditioning refrigerant pipes. It is also suitable for bending round copper tubes, aluminum tubes and copper tubes.
BulletPoint5 : Warm Tip: We have always adhered to the customer first service attitude. If you have any problems after receiving our product, please contact the customer service below, and we will provide you with satisfactory solutions at the first time.
Color : popular
ExternallyAssignedProductIdentifier1 : 0730792720236
ExternallyAssignedProductIdentifier2 : 730792720236
ItemDisplayWeight : 34 pounds
ItemName : 1/8in 3/16in 1/4in Pipe Bender, Tube Bender Tubing Fuel Brake AC Refrigerant Line Bending Tool Blue
ItemPackageDimensions_Height : 14.9 centimeters
ItemPackageDimensions_Length : 3.4 centimeters
ItemPackageDimensions_Width : 6.4 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Tefola
Material : Aluminum
ModelNumber : 301_NANO
NumberOfItems : 1
PartNumber : Tefola62tb3gusx1
ProductDescription : Specification:
Item Type: Tube Bender
Material: Aluminium Alloy
Color: Blue
Bending radius: 0-120°
Reference mark: 45-90°
Application: Suitable for small pipes of 1/8 inch (3mm), 3/16 inch (4mm), 1/4 inch (6mm), such as automobile fuel pipes and air conditioning refrigerant pipes. It is also suitable for bending round copper tubes, aluminum tubes and copper tubes.

How to Use:
1. Raise the handle of the pipe bander and position tubing in the correct channel size. Be sure the top surface of the tubing makes contact with the support(Fig 1).
2. Mark on the pipe where you needthe bend, making sure"0"on the handle is in line with o, slowly lower the handle until the "o"aligns with the desired angle (Fig 2 shows the position for a 45 angle, Fig3 shows a 90 angle).
3. If you need the bend to be to the left of the marked position, align the mark on the pipe to "L", and repeatthe motion needed to bend the pipe. right of the mark, position the mark on the pipe to "R"

Package List:
1 x Tube Bender


ProductSiteLaunchDate : 2022-08-30T01:49:02.837Z
Size : normal
SupplierDeclaredDgHzRegulation : not_applicable