Cart 2 india

Specification
Brand : Uphilltool
BulletPoint : Product Type: Accessory
BulletPoint1 : ➤【Main Parameters】Knot Number per Charge: 1500 times | Strapping Range: 8-34mm | Single Strapping Time: 0.8s | Battery Capacity: 4500 mAh | Wire Length: 300-500mm | Charging Time: 1.5h | Voltage: 12V.
BulletPoint2 : ➤【0.8S for Each Knot】The binding efficiency is increased by 2-4 times compared with the old version, and it takes only 0.8 seconds to tie a wire knot. Using this tool, one machine can easily replace the work of 3-4 laborers, saving time and energy while increasing overall productivity.
BulletPoint3 : ➤【2 x 1500mAh Battery】With 2 x 1500mAh large capacity battery that can be fully charged in just 1.5 hours, this rebar tie gun allows for extended periods of use without the need for constant recharging.
BulletPoint4 : ➤【Wide Range of Applications】Can be used for buildings, bridge engineering, highway tunnels, mine construction, floor pipe, heating floor mesh, steel bar, etc.
BulletPoint5 : ➤【Warm Note】Upon installing the coil for the first time, it is recommended to test the knot several times to ensure proper function. If the wire is not coming out, it may indicate that the coil was not installed properly.
Color : Orange
ExternallyAssignedProductIdentifier : 9086067720571
ExternallyAssignedProductIdentifier1 : 0765133473649
ExternallyAssignedProductIdentifier2 : 765133473649
IncludedComponents : 1x Tying Machine, 1x Pliers, 1x Charger, 1x Storage Box, 2x Lithium Ion Batteries
IncludedComponents1 : 1* 16T Hydraulic Jack
IncludedComponents2 : 8* Dies
IncludedComponents3 : 1* Hydraulic Rod
IncludedComponents4 : 2* Screws
ItemName : 0.3"-1.33" Rebar Tier Tying Machine, Rechargeable Handheld Steel Bar Rod Tying Binding Tool Automatic Rebar Tie Wire Twister Electric Reinforcing Rebar Tier Gun (Orange)
ItemPackageDimensions_Height : 6.7 inches
ItemPackageDimensions_Length : 28.5 inches
ItemPackageDimensions_Width : 7.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : rebar-cutters-and-benders
Manufacturer : Upthehill
Material : Plastic, Metal
ModelName : Rebar Tier Tying Machine
ModelNumber : 12V
NumberOfItems : 1
PartNumber : JZONUWJ8-ZYHA
PowerSourceType : Battery Powered
ProductDescription :

Specifications:

Color: Blue/Orange

Material: Plastic + Metal

Voltage: 12V

Battery: Lithium Ion Batteries

Battery Capacity: 4500 mAh

Battery Charging Time: 1.5 hours full filling

Tying Wire Diameter: 0.8mm

Tying Wire Length: more than 110 m /360 ft

Applicable Scope Of Steel Strapping: 8mm - 34mm /0.31" -1.34"

Knot Wire Length: 300 - 500mm /11.8" x 19.7"

Knot Number Per Charge: 1500 times

Knot The Required Time: 0.8 seconds at a time

Machine Size: 10.8'' x 2.6'' x 9.45''(appr.)

Tool box size: 16.54" x 11.8" x 4"(appr.)

Operation Instructions:

1.  The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.

Note: There can be no barrier between the mouth of the jaws and the wire.

2.  Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)

3.  When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.

4.  When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.

Package included:

1x Tying Machine

1x Pliers

1x Charger

1x Storage Box

2x Lithium Ion Batteries

1x Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)

ProductSiteLaunchDate : 2024-09-10T03:32:27.917Z
Size : 25.59*7.09*22.05 in
Style : Simple
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112500
Voltage : 12 volts