Cart 2 india

Specification
Brand : STANLEY
BulletPoint1 : Contoured handles
BulletPoint2 : Allows for comfort grip
BulletPoint3 : Tighter swings in confining work areas
BulletPoint4 : The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
BulletPoint5 : Widely used in milling machine, drilling machine or other machinery transmission occasions.
Color : 08B1-12.7mm
ExternallyAssignedProductIdentifier : 5281261516294
ExternallyAssignedProductIdentifier1 : 076174854817
ExternallyAssignedProductIdentifier2 : 0076174854817
ExternallyAssignedProductIdentifier3 : 00662289210572
FitType : Universal Fit
ItemName : Stanley 85-483T 3/8-Inch Drive Round Head Ratchet
ItemPackageDimensions_Height : 3.56 centimeters
ItemPackageDimensions_Length : 25.65 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : ratchets-and-pawls
Manufacturer : Stanley
Material : Carbon Steel
Material1 : black_oxide
Material2 : carbon steel c45
MeasurementSystem : Inch
ModelName : MF-TranX
ModelNumber : 85-483T
NumberOfItems : 1
NumberOfRows : 1
NumberOfTeeth : 17
PartNumber : 85-483T
ProductDescription : Features:
1. Idler sprocket is a chain sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.
2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.
4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.

Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 17
Bearing Model: 6203Z
Outside Diameter: 74mm / 2.91-inch
Bump Width: 6mm / 0.24-inch
Total Width: 19mm / 0.75-inch
Bore Diameter: 17mm / 0.67-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch

Package Content: 1 x Idler Sprocket
ProductSiteLaunchDate : 2001-12-20T00:00:01-08:00
Size : 74mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700