Cart 2 india

Specification
Brand : SparkFun
BulletPoint : 10PCS BTB12-600B BTB12 600B BTB12-600BW 600V 12A TO-220 bidirectional controlled thyristor
BulletPoint1 : The SparkFun Qwiic Dynamic NFC/RFID Tag features the ST25DV64KC dynamic Near Frequency Communication (NFC) / Radio Frequency Identification (RFID) tag IC.
BulletPoint2 : The SparkFun Qwiic Dynamic NFC/RFID Tag includes 64 Kbit EEPROM for users to write and read data from, a general purpose output to act as an external interrupt reporting events such as RF field changes, RF activity, I2C writes and RF switches toggling over I2C.
BulletPoint3 : The IC has a supply voltage range of 1.8V to 5.5V though when in a Qwiic circuit it runs at 3.3V. It also includes an energy harvesting pin capable of outputting µW of power with an RF field of sufficient strength.
BulletPoint4 : The ST25DV64KC supports a fast transfer mode to send the contents of a 256-byte buffer between a device connected to the tag over I2C (referred to as the tag's Mailbox) and an RF device such as a reader or smartphone.
BulletPoint5 : This makes it so you can store data on the tag and have it available for reading by an RF device by simply bringing it into the RF read range, even if the tag is powered off. This data can also be password protected with a 64-bit value.
ExternallyAssignedProductIdentifier1 : 0845156013319
ExternallyAssignedProductIdentifier2 : 845156013319
IncludedComponents : Qwiic
ItemName : SparkFun Qwiic Dynamic NFC/RFID Tag ST25DV64KC dynamic NFC Contactless Interface Data protection General Purpose Output (GPO) pin
ItemPackageDimensions_Height : 6 millimeters
ItemPackageDimensions_Length : 28 millimeters
ItemPackageDimensions_Width : 28 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : radio-frequency-transceivers
Manufacturer : SparkFun Electronics
Material : Copper
ModelNumber : TYN612
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SEN-21274
ProductDescription : The SparkFun Qwiic Dynamic NFC/RFID Tag features the ST25DV64KC dynamic Near Frequency Communication (NFC) / Radio Frequency Identification (RFID) tag IC from STMicroelectronics. The ST25DV64KC offers 64-kBit (8-kBytes) of EEPROM memory which can be accessed over both I2C and RF (NFC)! It's a state-of-the-art tag that conforms to ISO/IEC 15693 or NFC Forum Type 5 recommendations. You can even read and write the tag's memory using NFC even while the tag is powered down or disconnected!
The SparkFun Qwiic Dynamic NFC/RFID Tag includes 64 Kbit EEPROM for users to write and read data from, a general purpose output to act as an external interrupt reporting events such as RF field changes, RF activity, I2C writes and RF switches toggling over I2C. The IC has a supply voltage range of 1.8V to 5.5V though when in a Qwiic circuit it runs at 3.3V. It also includes an energy harvesting pin capable of outputting µW of power with an RF field of sufficient strength. The ST25DV64KC supports a fast transfer mode to send the contents of a 256-byte buffer between a device connected to the tag over I2C (referred to as the tag's Mailbox) and an RF device such as a reader or smartphone. This makes it so you can store data on the tag and have it available for reading by an RF device by simply bringing it into the RF read range, even if the tag is powered off. This data can also be password protected with a 64-bit value.
ProductSiteLaunchDate : 2023-04-11T17:03:18.492Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1