Cart 2 india

Specification
Brand : Kwerfhtgy
BulletPoint1 : No insertion loss, no external duplex equipment.
BulletPoint2 : RMS-11 is -10.
BulletPoint3 : This mixer is designed for single supply RF, IF and LO ports with for blocking capacitors for ease of use. The high operating frequency of the RF and LO inputs is 1900MHz. The IF output is a single-ended voltage output. With 250MHz output bandwidth. A single resistor connected between the OUT and Fb pins is used to set the gain.
BulletPoint4 : The amplifier features low for offset and can be used for DC-to-baseband frequency conversion and quadrature amplitude demodulation as well as other DC-coupled applications.
BulletPoint5 : The mixer's output amplifier and optimal source impedance, the mixer SSB noise figure is 10.3 at 70MHz. Unlike passive mixers, the RMS-11 has no insertion loss, no external duplexer, and no passive termination.
ExternallyAssignedProductIdentifier : 7633232731171
ItemName : Kwerfhtgy RMS-11 5-1900MHz RF Radio Frequency Up and Down Frequency Conversion Passive Mixer Module Green Color 1900mhz
ItemPackageQuantity : 1
ItemTypeKeyword : radio-frequency-transceivers
Manufacturer : Kwerfhtgy
Material : Copper
ModelNumber : MHF2-20D--1
NumberOfItems : 1
PartNumber : Kwerfhtgy
ProductDescription : RMS-11 5-1900MHz RF Radio Frequency Up And Down Frequency Conversion Passive Mixer Module Green Color 1900mhz
Features:
brand new and
RMS-11 is -10.
dBm LO power consumption provides +24.
dBm third-order intermodulation point without the need for high-power LO and associated shielding and isolation issues, improving passive mixer performance. System performance, reduce system cost.
This mixer is designed for single supply RF, IF and LO ports with for blocking capacitors for ease of use. The high operating frequency of the RF and LO inputs is 1900MHz. The IF output is a single-ended voltage output. With 250MHz output bandwidth. A single resistor connected between the OUT and Fb pins is used to set the gain.
The amplifier features low for offset and can be used for DC-to-baseband frequency conversion and quadrature amplitude demodulation as well as other DC-coupled applications.
The mixer's output amplifier and optimal source impedance, the mixer SSB noise figure is 10.3 at 70MHz. Unlike passive mixers, the RMS-11 has no insertion loss, no external duplexer, and no passive termination.
No insertion loss, no external duplex equipment.

Specifications:
Model: RMS-11
Size: 45 x 45mm

Package Includes:
1 x RMS-11 5-1900Mhz Rf Up/Down Conversion Passive Mixer

Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We are sure that the is the same as the pictures show.
Please allow slight dimension difference due to different manual measurements.
ProductSiteLaunchDate : 2024-05-28T23:24:18.000Z