Cart 2 india

Specification
Brand : Denash
BulletPoint : Type:other
BulletPoint1 : Parameters: RF and LO inputs operate up to 500 MHz The IF output is a single ended voltage output with 250 MHz output bandwidth, a single resistor connected between pins OUT and FB is used to set the gain.
BulletPoint2 : Application: The AD831 is a low distortion, wide dynamic range, single chip mixer for HF and VHF receivers, RF IF frequencies, second mixers in base stations, DC baseband conversion, quadrature modulation and demodulation, as well as ultrasound imaging and other applications.
BulletPoint3 : Noise Figure, No Insertion Loss: The mixer's SSB noise figure is 10.3 dB at 70 MHz when the mixer's output amplifier and optimal source impedance are present, the AD831 has no insertion loss, requires no external duplexing device, and requires no passive termination.
BulletPoint4 : ‑10 dBm LO Power: The AD831 provides a +24 dBm third order intermodulation point to achieve ‑10 dBm LO power, eliminating the need for a high power LO driver.
BulletPoint5 : Premium Performance: No corresponding shielding and isolation, improved system performance compared to passive mixers, single power supply with DC isolation capacitors for RF, IF and LO ports.
Color : #222
IncludedComponents : No
ItemName : High Frequency RF Mixer, Professional High Accuracy 0.1-500MHz AD831 High Frequency RF Mixer Module Wide Dynamic Range for VHF Receiver
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : radio-frequency-transceivers
Manufacturer : Denash
Material : metal
ModelName : Denash9x4recganw
ModelNumber : Denash9x4recganw
NumberOfItems : 1
PartNumber : Denash9x4recganw
ProductDescription : 1. Application: The AD831 is a low distortion, wide dynamic range, single chip mixer for HF and VHF receivers, RF IF frequencies, second mixers in base stations, DC baseband conversion, quadrature modulation and demodulation, as well as ultrasound imaging and other applications.
2. Premium Performance: No corresponding shielding and isolation, improved system performance compared to passive mixers, single power supply with DC isolation capacitors for RF, IF and LO ports.
3. Parameters: RF and LO inputs operate up to 500 MHz The IF output is a single ended voltage output with 250 MHz output bandwidth, a single resistor connected between pins OUT and FB is used to set the gain.
4. Noise Figure, No Insertion Loss: The mixer's SSB noise figure is 10.3 dB at 70 MHz when the mixer's output amplifier and optimal source impedance are present, the AD831 has no insertion loss, requires no external duplexing device, and requires no passive termination.
5. ‑10 dBm LO Power: The AD831 provides a +24 dBm third order intermodulation point to achieve ‑10 dBm LO power, eliminating the need for a high power LO driver.

Spec:
Item Type: AD831 High Frequency RF Mixer Module
Material: PCB, Metal
Chip Model: AD831
Supply Voltage: ±5V
Supply Current: ±95mA
RF Input: 0.1-500MHz
RF Frequency: DC~500MHz
L0 Frequency: DC~500MIHz
IF Frequency: DC~250MHz
Local Oscillator Drive: -10dBm
Variable Frequency Gain: 8dB
Crossmodulation Point: +24dBm IP3

How to Use:
Install and use!

PackageList:
1 xAD831 High Frequency RF Mixer Module

ProductSiteLaunchDate : 2024-06-19T07:03:53.566Z
UnitCount : 1
WarrantyDescription : Manufacturer warranty for 90 day.