Cart 2 india

Specification
Brand : EBYTE
BulletPoint1 : Application: Home security alarm and remote keyless entry; Wireless alarm security system; Building automation solutions; Wireless industrial-grade remote control; Health care products; Advanced Meter Reading Architecture(AMI); Automotive industry applications.
BulletPoint2 : Features: The measured communication distance can reach 0.6 km; Maximum transmission power of 10mW, software multi-level adjustable; Support the global license-free ISM 433 MHz band;
BulletPoint3 : Support air date rate of 0.3kbps?500kbps; ?Support multiple modulation modes (OOK, ASK, GFSK, 2-FSK, 4-FSK and MSK); Independent 64-byte RX FIFO and TX FIFO;
BulletPoint4 : Support 1.8V~3.6V power supply, power supply over 3.3 V can guarantee the best performance; Industrial grade standard design, support -40 ~ 85 °C for working over a long time; IPEX and stamp hole optional, good for secondary development and integration;
BulletPoint5 : Support RSSI (received signal strength indication) and LQI (link quality indication); It connects to MCU through 4-wire SPI interface, and provides two universal digital output pins with settable functions.
Color : E07-M1101D-TH
ExternallyAssignedProductIdentifier : 6191650337531
ItemName : EBYTE E07-M1101D-TH 433MHz CC1101 Wireless rf Module 500m SPI SMD rf Transmitter and Receiver 433 MHz with Spring Antenna
ItemPackageDimensions_Height : 11.3 centimeters
ItemPackageDimensions_Length : 0.2 centimeters
ItemPackageDimensions_Width : 7.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : radio-frequency-transceivers
Manufacturer : Ebyte
Material : pex
ModelNumber : USA-LORA1276-C1
NumberOfBoxes : 1
PartNumber : E07-M1101D-TH
ProductDescription : [IC] : CC1101 
[Frequency] : 387~464MHz 
[Power] : 10dBm 
[Distance] : 0.5km 
[Interface] : SPI 

[Introduction] : E07-M1101D-TH is a self-developed, small-size, 433 MHz DIP wireless module with a maximum tx power of 10mW based on CC1101 of Texas Instruments. Due to the adoption of the very mature CC1101 as the core chip, its stability has been unanimously praised by user. 

The module is mainly used in smart home, industrial, scientific research and medical, as well as short-range wireless communication equipment. Because RF performance and component selection are in accordance with industrial standards, and the product has obtained FCC, CE, RoHS and other international authority certifications, users do not need to worry about its performance. 

Extensive hardware support for packet processing, data buffering, burst transmission, Received Signal Strength Indication (RSSI), Clear Channel Assessment (CCA), Link Quality Indication, and Wireless Wake-up (WOR) is available. It uses an industrial grade high precision 26MHz crystal. 

Since the module is a RF transceiver module, user needs to use an MCU to drive or use a dedicated SPI debug tool. 

[Application] Widely used in various occasions Meter reading Industrial wireless control Smart lock Home remote control Temp/humidity sensor

 
ProductSiteLaunchDate : 2021-03-22T01:40:08.738Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43220000