Cart 2 india

Specification
Brand : Browning
BulletPoint1 : Reverse mounting possible
BulletPoint2 : Single split barrel
BulletPoint3 : 3/4" per ft taper on barrel
BulletPoint4 : Bore range 1/2" to 7"
BulletPoint5 : [Note] - Keep the bearing working environment clean and bearing lubricated in time.
Color : 7005CTYN P5 DT
ExternallyAssignedProductIdentifier1 : 662289321346
ExternallyAssignedProductIdentifier2 : 0662289321346
ExternallyAssignedProductIdentifier3 : 00662289321346
ItemName : Browning SK 2 3/16 Q-D Bushing 2-3/16 Bore 1/2 x 1/4 Keyway"
ItemPackageDimensions_Height : 6.604 centimeters
ItemPackageDimensions_Length : 11.684 centimeters
ItemPackageDimensions_Width : 10.922 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : quick-disconnect-bushings
Manufacturer : Regal
Material : Steel
ModelNumber : a19091100ux0595
NumberOfItems : 1
PackageLevel : unit
PartNumber : SK 2 3/16
ProductDescription : Note：
Please refer to the picture and select the right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: F6901ZZ
Shielded Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 12mm
Outer Diameter (D): 24mm
Thickness (B): 6mm
Flange Dia.: 26.5mm
Flange Thickness: 1.5mm
Dynamic Load Rating (Cr): 2.831kN
Static Load Rating (Cor): 1.411kN
Accuracy Class: P0 (ABEC1)
Noise Level: Z1
Number of Pack: 4 Pcs

ProductSiteLaunchDate : 2013-08-15T18:48:29.724Z
Size : 12x24x6mm
SpecificationMet : Ul
Style : SK
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31000000