Editorial Review This safety quick connect/disconnect connector kits are widely applied in various field. This kits always are equiped in Electrcar, folklift, electric folk truck, golf car, tour bus and many other power-driven tools to solve the power-out problem. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable. The mark of positive and negative are printed in the conncetor to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust. Very easy to install:. 1.Strip the insulation to fit the terminal pins. 2.Insert the cable into the ternimal pins. 3. Crimp the terminal pins. 4.Insert terminal pins in housing with notched side of tongue next to spring. 5.Final adjustment Push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place.. Package:2 connector ends, 4 terminal pins, and 2 rubber boot caps
Features 1) Fits 2-4 Gauge wire; Voltage: 12-36 volts; Capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices 2) Package include: 2x Polycarbonate cover; 2x Hard rubber Boot caps; 4x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1"; Connected set: 5-1/4" x 2-1/8" x 1" 3) Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side. 4) WARRANTY: One year Guarantee. We provide free replacement for you during the warranty period. If there is any question, please feel free to contact with us.