Cart 2 india

Specification
Brand : Yoebor
BulletPoint : Plug In Stem Elbows allows offers one side to be a quick connect with a 90 degree bend followed by a hard stem that can be plugged in to another quick connect fitting. Material : Acetal
BulletPoint1 : Body Style: Male NPT Straight Push-in Connect Fittings
BulletPoint2 : NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
BulletPoint3 : Made of 304 stainless steel whicn has corrosion resistance, can enhance the strength, not easy to break.
BulletPoint4 : Pressure Range: 0 ~ 290 Psi/0-2Mpa; Operating Temperature Range: -20℃～140℃/-4°F～284°F;
BulletPoint5 : Negative Pressure:-100Kpa | -29.5 In Hg; Applicable Tube:PU / PA / PE / PVC
BulletPoint6 : Versatile: The John Guest Acetal Fixed Elbow Quick Connect Fitting has many uses. It works with PEX, copper, and plastic pipes. It's compatible with any plumbing system, regardless of material.
BulletPoint7 : Space-saving: This fitting's fixed elbow is suitable for tight spaces. It saves space and improves plumbing efficiency by routing pipes around corners and barriers.
Color : Multiple Colors
ConnectorType : Elbow
ConnectorType1 : Plug
ConnectorType2 : Elbow
ExteriorFinish : Grey
GpsrSafetyAttestation : 1
IncludedComponents : John Guest - Acetal Plug In Stem Elbow Quick Connect Fitting 1/2" OD / 1/2" OD / Single-Grey
ItemName : Yoebor 304 Stainless Steel Pneumatic Male Straight Adapter 10mm OD x 3/8" NPT Thread Push to Connect Fitting 2pcs
ItemPackageDimensions_Height : 2.1 inches
ItemPackageDimensions_Length : 0.6 inches
ItemPackageDimensions_Width : 1.2 inches
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : Yoebor
Material : Other
ModelName : PI221616S
ModelNumber : SS304-PC10C-2
NumberOfItems : 2
NumberOfPieces : 3
PartNumber : SS304-PC10C-2
ProductDescription : Material: Stainless Steel
Shape:Straight Shape
Fluid Admitted: Air
Pressure Range: 0 ~ 290 Psi
Operating Temperature Range: -4～284°F

About Installation:
1 .After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
2 .After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
3.When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
4.After installation, you just need to rotate the joint body to adjust the direction of the pipe.
ProductSiteLaunchDate : 2024-09-24T03:51:48.730Z
Size : 10mm OD x 3/8" NPT
Style : Manual
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 40141700