Specification Brand : Still Awake BulletPoint1 : Product Name: Push Connect Splitter Fitting; Model: PY-8; Tube Size: 8mm(5/16”) BulletPoint2 : Operating Pressure: 0-0.9MPa; Max Working Pressure : 1.32MPa; Working Temperature: 0 - 60 Degrees Celsius BulletPoint3 : Type: Push to connect tube cap on three separate end, good release cap that can withstand greater and stronger pressure without tripping. BulletPoint4 : Advantage: Wear-resistant, light weight, anti-crushing, anti-pressure, anti-corrosion, good sealing performance and long service life. BulletPoint5 : Connect Tube Materials: designed to connect polyethylene, nylon and PU tubes. Quick and simple installation. BulletPoint6 : Fastening Type: Push-Pull BulletPoint7 : Contact Finish - Mating: Gold Color : Blue ConnectorType : Cap ExteriorFinish : Black ExternallyAssignedProductIdentifier1 : 0764915292973 ExternallyAssignedProductIdentifier2 : 764915292973 IncludedComponents : Connector ItemName : Y Shape Push Fittings, 8mm (5/16”) OD Push to Connect Quick Fitting, Air line Push Lock Tube Fitting Splitter, 20Pcs (PY8) ItemPackageDimensions_Height : 18.6 centimeters ItemPackageDimensions_Length : 3.2 centimeters ItemPackageDimensions_Width : 14 centimeters ItemPackageQuantity : 2 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : Still Awake Material : Plastic NumberOfItems : 50 NumberOfPieces : 20 PartNumber : b43500001 ProductDescription : Size:8mm
Specification: Product Name: Splitter Fitting Model: PY-8 Size: 43mm x 30mm x 9mm/ 1.69” x 1.2” x 0.35” (L*W*H) Operating Pressure: 0-0.9MPa Limiting Pressure: 1.32MPa Operating Temperature: 0-60 Degree Celsius Three Tube Size (OD): 8mm(5/16”) Color: Black, Blue Material: Plastic
Installation: 1. Cut the pipe flat without slope 2. When inserting the pipe into the connector, it must be inserted into the end, otherwise leakage may occur. 3. After inserting, try to pull out the tube. If it can't be pulled out, it means it is connected. 4. When loosening the tube, first confirm that the tube is not under pressure and then press the end cap evenly to the bottom.