Specification Brand : VETLEY BulletPoint1 : 1.Product Name:Push to connect Plug in Elbow Fitting BulletPoint2 : 2.Product Size:1/4‘’ Tube OD BulletPoint3 : 3.Product Material:PBT Resin;Fluid Type:air, vacuum BulletPoint4 : 4.Working Temperature:32~160 °F / 0~70°C;Working Pressure:0~150 PSI / 0~9.9kgf/cm2(0~990 kPa) BulletPoint5 : 5.Application of Tube:PU/PE/PA/PVC/Nylon/PTFE BulletPoint6 : QUALITY ASSURANCE: D.O.T Air Line fittings can be used repeatedly after clogging, high pressure resistance and stability. Ordinary after the ordinary joint trip, the clamping force of the spring is very weak, the pressure resistance is poor, and it can not be reused. BulletPoint7 : APPLICABLE SCENARIOS: Suitable for auto parts repair, electronic manufacturing, trucks trailers or industrial. (Tip: Connectors that do not apply to water pipes.) BulletPoint8 : AFTER SALE: If there is a quality question, please feel free to contact us, I will do my best to solve your problem as soon as possible, until you are satisfied. All dot brass air line fittings are tested before leaving the factory! Color : Black ConnectorType : Elbow ExteriorFinish : Brass ExternallyAssignedProductIdentifier1 : 0768694652515 ExternallyAssignedProductIdentifier2 : 768694652515 IncludedComponents : 3 PCS 3/8" OD * 1/4" NPT Tee dot air fittings ItemName : VETLEY Pneumatic 1/4 Inch x 1/4 Inch Tube OD Quick Push In to Connect Plug In Elbow Fitting PLJ1/4(Pack of 5) ItemPackageDimensions_Height : 0.55 inches ItemPackageDimensions_Length : 3.39 inches ItemPackageDimensions_Width : 2.17 inches ItemPackageQuantity : 1 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : VETLEY Material : Brass Material1 : Plastic Material2 : Copper ModelName : 3/8" * 1/4"DOT Brass Fittings Tee ModelNumber : D-TJ-TNZ02-3 NumberOfItems : 5 NumberOfPieces : 5 PartNumber : PLJ1/4,5 ProductDescription : 1.Product Name:Push to connect Plug in Elbow Fitting 2.Product Size:1/4‘’ Tube OD 3.Material:Plastic, Copper;Fluid Type:air, vacuum 4.Working Temperature:32~160 °F / 0~70°C;Working Pressure:0~150 Psi 5.Application of Trachea:PU/PE/PA/PVC/Nylon/PTFE
Precautions: 1.To confirm that the cut surface of the pipe is finally vertical, the pipe is not oval. 2. After the tube is inserted, pull the tube to confirm that the tube cannot be pulled out. 3. When loosening the tube, please confirm that the internal pressure of the tube is zero. 4. If you have unclear parameters or technical problems, you can consult before placing an order.