Specification Brand : uxcell BulletPoint1 : Fit Tube OD and Thread Size: 6mm x 1/8" G; Operating Pressure: 0-0.9MPa; Operating temperature: 0 - 60 Degree Celsius BulletPoint2 : Push to connect fitting can realize the pipeline together or disconnected without tools, mainly used for air compression systems, vacuum systems, pneumatic systems, 3D printers. BulletPoint3 : Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping. Even after installation, the release cap can be rotated 360 degrees. BulletPoint4 : Have abrasion resistance, light weight, and resistance to crushing and cracking, compressive and corrosion resistant, good sealing performance and long service life. BulletPoint5 : Designed for using to connect with polyethylene, nylon and PU tubing. Quick and simple installation. Threads are pre-coated with PTFE for good sealing performance. Color : Blue,Gold ConnectorType : Cap ExteriorFinish : Brass ItemName : uxcell Straight Pneumatic Push to Quick Connect Fittings G1/8 Male x 6mm Tube OD 10pcs ItemPackageDimensions_Height : 12.5984 centimeters ItemPackageDimensions_Length : 3.9878 centimeters ItemPackageDimensions_Width : 8.509 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : uxcell Material1 : Brass Material2 : Plastic ModelNumber : a18092200ux0598 NumberOfItems : 10 NumberOfPieces : 10 PartNumber : a18092200ux0598 ProductDescription : Product Features: Product Name : Quick Fittings Model : PC6-01 Net Weight : 51g Color : Gold Tone,Blue Material : Plastic,Brass Thread Size : 1/8" G Tube Size (OD): 6mm = 15/64" Type: Male Straight Thread Connector Thread Tube Inner Hole Type : Hex Type Operating Pressure : 0-0.9MPa Dimension : 20mm x 12mm / 0.79" x 0.47" (L x W )
Package Content: 10pcs x Quick Fittings
Description: 1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely. 2.Push-to-connect tube connection on one end and male G threads on the other end. 3.A good release cap can withstand greater and stronger pressure without tripping. 4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life. 5.Elliptical release ring help to connect tube easily by manual, no special tools required. 6.Outside (and Inside where applicable) hexagonal wrench tightening.
Mounted: 1.Cut the pipe flat, no slope 2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak. 3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected. 4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.