Cart 2 india

Specification
Brand : uxcell
BulletPoint : MTU1/4-5/32
BulletPoint1 : Fit Tube OD and Thread Size: 1/2NPT Male x 12mm Tube OD; Operating Pressure: 0-0.9MPa; Operating temperature: 0 - 60 Degree Celsius
BulletPoint2 : Push to connect fitting can realize the pipeline together or disconnected without tools, mainly used for air compression systems, vacuum systems, pneumatic systems, 3D printers.
BulletPoint3 : Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping. Even after installation, the release cap can be rotated 360 degrees.
BulletPoint4 : Have abrasion resistance, light weight, and resistance to crushing and cracking, compressive and corrosion resistant, good sealing performance and long service life.
BulletPoint5 : Designed for using to connect with polyethylene, nylon and PU tubing. Quick and simple installation. Threads are pre-coated with PTFE for good sealing performance.
Color : Silver
ConnectorType : Cap
CustomerPackageType : Standard Packaging
ExteriorFinish : Silver
ExternallyAssignedProductIdentifier1 : 820099873114
ExternallyAssignedProductIdentifier2 : 0820099873114
IncludedComponents : push to connect fittings*10
ItemName : uxcell Straight Pneumatic Push To Quick Connect Fittings 1/2NPT Male x 12mm Tube OD Silver Tone 3pcs
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 6.858 centimeters
ItemPackageQuantity : 1
ItemShape : Tube Reducer
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : uxcell
Material : Polyurethane,Nylon
Material1 : Plastic
Material2 : Metal
ModelName : PC-1/4-N2
ModelNumber : a19090300ux0478
NumberOfItems : 1
NumberOfPieces : 3
PartNumber : a19090300ux0478
ProductDescription : Product Features:
Product Name : Push to Connect Fittings
Model :MPC12-04
Color : Silver Tone,Black
Material : Plastic,Metal
Thread Size : 1/2NPT
Tube Size (OD) : 12mm / 1/2"
Type: Male Straight Thread Connector
Operating Pressure : 0-0.8MPa
Operating temperature：0 - 60 Degree Celsius
Dimension : 34mm x 21mm / 1.34-inch x 0.83-inch (L x W )

Package Content:
3 pcs x Push to Connect Fittings

Description:
1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on one end and male G threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.
6.Outside (and Inside where applicable) hexagonal wrench tightening.

Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.

ProductSiteLaunchDate : 2019-10-18T14:02:03.233Z
Size : 1/4" Push-to-Connect Tube x 3/8" Tube Stem
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700