Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Fit Tube OD: 14mm; Male Thread Size: 1/2PT(Approx OD 20.4mm).
BulletPoint2 : The male thread end is connected to a female tube, with special sealing coating and can be connected directly without sealing tape. Push-to-connect end is connected to a hose.
BulletPoint3 : The Push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance.
BulletPoint4 : Applications: Mainly used for air compression systems, vacuum systems, pneumatic systems.
BulletPoint5 : Note: Make sure that the cutting surface of the pipe is vertical. Please insert the tube into the bottom before use.
Color : Gray
ConnectorType1 : Cap
ConnectorType2 : Elbow
ExteriorFinish1 : Nickel
ExteriorFinish2 : Brass
ItemName : uxcell Elbow Push to Connect Air Fittings 14mm Tube OD X 1/2PT Male Thread Pneumatic Quick Release Connectors Grey
ItemPackageDimensions_Height : 12.8 centimeters
ItemPackageDimensions_Length : 2.7 centimeters
ItemPackageDimensions_Width : 9.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : uxcell
Material : Stainless Steel
Material1 : Brass
Material2 : Plastic
ModelNumber : a19111100ux0209
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : a19111100ux0209
ProductDescription : Features:
Color : Grey
Material : Plastic, Nickel-plated Brass
Type: 90 Degree Swivel Elbow Connector
Tube Size (OD) : 14mm / 9/16"
Male Thread Size: 1/2PT
Operating temperature：-10 - 60 Degree Celsius

Package Content:
1 x Fitting

Description:
1.Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing.
2.Push-to-connect tube connection on one end and male PT threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have flexibility, abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Easy to install, insert the plastic tube, the cap can be rotated freely, but its rotation is only used when the angle is wrong when the joint is installed.
6.The small tube use for fixed.

Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.
ProductSiteLaunchDate : 2020-09-15T04:02:58.737Z
Size : 14mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700