Specification Brand : SMC BulletPoint1 : Male adapter to connect a tube to a female thread BulletPoint2 : Push-to-connect inch tube connection on one end and male NPT threads with sealant on the other end BulletPoint3 : Brass body and threads for resistance to corrosion BulletPoint4 : Operating pressure range of -14.5 to 145 PSI (-100 kPa to 1 MPa) BulletPoint5 : Operating temperature ranges of 23 to 140 degrees F (-5 to 60 degrees C) (ambient) and 32 to 104 degrees F (0 to 40 degrees C) (fluid) Color : Brass ConnectorType : Adapter ExteriorFinish : Brass ItemName : SMC KQ2H07-34AS Brass Push-to-Connect Tube Fitting with Sealant, Adapter, 1/4" Tube OD x 1/8" NPT Male (Pack of 10) ItemPackageDimensions_Height : 1.27 centimeters ItemPackageDimensions_Length : 8.128 centimeters ItemPackageDimensions_Width : 2.63144 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : SMC Corporation of America Material : Brass ModelNumber : a19090300ux0723 NumberOfItems : 10 NumberOfPieces : 10 NumberOfPieces1 : 1 NumberOfPieces2 : 2 PartNumber : KQ2H07-34AS ProductDescription : Product Features: Product Name : Push to Connect Fittings Model : MPG12-6 Color : Black; Material : Plastic; Type: Straight Connector; Tube Size (OD) : 1/2" - 1/4" (12mm-6mm) Operating Pressure : 0-1MPa; Operating temperature:-10 - 60 Degree Celsius; Dimension : 44mm x 21mm / 1.73-inch x 0.83-inch (L x D );
Package Content: 2pcs x Push to Connect Fittings
Description: 1.Push to Connect Fittings designed for using to connect with polyethylene, nylon and PU tubing. 2.Easy to install .This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly 3.Have flexibility, abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life. 4.You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape. 5.All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space Mounted: 1.Cut the pipe flat, no slope 2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak. 3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected. 4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.