Cart 2 india

Specification
Brand : Pysrych
BulletPoint1 : Fluid Admitted: Air, Vacuum
BulletPoint2 : Working Pressure:0-1.2Mpa
BulletPoint3 : Negative Pressure:-100Kpa
BulletPoint4 : Body: Nickel Plated Brass Seal, O-Ring NBR
BulletPoint5 : Working Temperature: 0-70°C. Applicable Tube: PU / PA / PE / PVC
Color : Black
ConnectorType : Union
ExteriorFinish : Plastic
ExternallyAssignedProductIdentifier1 : 0769987068594
ExternallyAssignedProductIdentifier2 : 769987068594
ItemName : Pysrych Nickel Plated Brass & Plastic Push to Connect Inline Check Valve Air Straight Union Quick Release Pneumatic Fitting, 6mm Tube OD (Pack of 5)
ItemPackageDimensions_Height : 1.6 inches
ItemPackageDimensions_Length : 4.4 inches
ItemPackageDimensions_Width : 3.2 inches
ItemPackageQuantity : 10
ItemShape : Tee
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : Pysrych
Material : Nickel Plated Brass,Plastic
ModelNumber : CVPU-6-5
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : CVPU-6-5
ProductDescription : Range of application:
1.Working Medium:Compressed Air(Not other gas or liquid)
2.Working Pressure:0~150 PSI / 0~9.9kgf/cm2(0~990 kPa)
3.Negative Pressure:-29.5 in Hg/ -750mm Hg(-750 Torr)
4.Working Temperature:32~160 °F / 0~70°C
5.Application of Trachea:PU/PE/PA/PVC/Nylon/PTFE

Product Feature:
1.Good for low pressure devices.
2.This valve allows compressed air from one side flow and blocks the inverse flow to pretect and maintain the vacuum line and is easily applied to low pressure piping.

Installation Method:
1.Confirm the air flow control direction before connecting the tube,if the flow control direction operates backwards,air will not flow
2.After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.
3.After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.
4.When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.
5.After installation, you just need to rotate the joint body to adjust the direction of the pipe.
6.If there are unclear parameters or technical problems, you can consult before placing an order, so that you can use it correctly.

Notice:
1.Do Not Use for Fittings for Drinking Water Pipes.
2.Avoid Contact with Fire Sources.
3.Do Not Use Fittings under Extra External Load (Bend, Twist or Pull), Otherwise It will Cause Damage or Leakage.
4.Avoid Mixing with Incompatible Materials (Strong Oxidants, Acids, Bases, Etc.).
ProductSiteLaunchDate : 2022-11-15T06:48:48.276Z
Size : 6mm OD
Style : Push-to-Connect
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
UnspscCode : 40141600
ValveType : air flow,air flow control