Specification Brand : Othmro BulletPoint : MTC5/32-N01 BulletPoint1 : 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting ; Type: 90 Deg Swivel Elbow Male Connector BulletPoint2 : Operating Pressure : 0-1MPa ; Operating temperature:-10 - 60 Degree Celsius BulletPoint3 : 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping. BulletPoint4 : 【ADVANTAGE】-Have light weight, and resistance to crushing and cracking,Compressive and good sealing performance and long service life. BulletPoint5 : 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with PE, nylon and PU tubing. Color : 1Pc PL4-M5 ConnectorType : Adapter ConnectorType1 : Cap ConnectorType2 : Elbow Department : unisex-adult ExteriorFinish : Brass ExternallyAssignedProductIdentifier : 00840123503206 ExternallyAssignedProductIdentifier1 : 696303054101 ExternallyAssignedProductIdentifier2 : 0696303054101 ItemName : Othmro 1Pcs Push to Connect Tube Fitting Male Elbow 4mm Tube OD x 5mm Thread Pneumatic Air Push Fit Lock Fitting Blue PL4-M5 ItemPackageDimensions_Height : 7.7 centimeters ItemPackageDimensions_Length : 1.3 centimeters ItemPackageDimensions_Width : 6.8 centimeters ItemPackageQuantity : 1 ItemShape : 90 Degree Elbow ItemTypeKeyword : push-to-connect-tube-fittings Manufacturer : Othmro Material : Plastic Material1 : Nylon Material2 : Brass ModelName : 31954400 ModelNumber : OTH190906J-0161 NumberOfItems : 1 NumberOfPieces : 1 PartNumber : OTH190906J-0161 ProductDescription : Feature The Push-to-connect end can be rotated 360 degrees even after installation, which is convenient to use and has good sealing performance.
Material Made of plastic and brass, with high strength, good sealing performance and long service life.
Applications Mainly used for air compression systems, vacuum systems, pneumatic systems.
Note:
1.Make sure that the cutting surface of the pipe is vertical. Please insert the tube into the bottom before use.
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.