Cart 2 india

Specification
Brand : John Guest
BulletPoint1 : Quick connect/disconnect
BulletPoint2 : Lead free
BulletPoint3 : Brass body
BulletPoint4 : Use on poly or copper tube
BulletPoint5 : Corrosion free
Color : Copper
ConnectorType : Flare
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 665626120718
ExternallyAssignedProductIdentifier2 : 0665626120718
ExternallyAssignedProductIdentifier3 : 00665626120718
ItemName : John Guest MI4512F4SLF Female Flare Connector, 3/8" OD x 1/4 (Pack of 10)
ItemPackageDimensions_Height : 9.6 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 9.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : John Guest
Material : Nylon
Material1 : Brass
Material2 : Copper
ModelNumber : MI4512F4SLF
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : MI4512F4SLF
ProductDescription : Product Features:
Product Name : Push to Connect Fittings
Model :MPC12-02
Color : Silver Tone,Black
Material : Plastic,Metal
Thread Size : 1/4NPT
Tube Size (OD) : 12mm / 1/2"
Type: Male Straight Thread Connector
Operating Pressure : 0-0.8MPa
Operating temperature：0 - 60 Degree Celsius
Dimension : 32.8mm x 21mm / 1.29-inch x 0.83-inch (L x W )

Package Content:
3 pcs x Push to Connect Fittings

Description:
1.The quick fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on one end and male G threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.
6.Outside (and Inside where applicable) hexagonal wrench tightening.

Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.

ProductSiteLaunchDate : 2014-08-29T00:00:01-07:00
Size : 1/4NPT x 12mm
StreetDate : 2018-07-03T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 40183100