Cart 2 india

Specification
Brand : DERPIPE
BulletPoint1 : Name: Push to connect valve; Size: 3/8" to 3/8" ; Material: plastic.
BulletPoint2 : Suitable for 3/8" OD Pneumatic Tubing.
BulletPoint3 : Used for control the switching gas flow.
BulletPoint4 : Fluid Admitted: Air, Vacuum, Water (No Freezing).
BulletPoint5 : Tube fittings are easy to install, flexible and space-saving, release rings adopt ellipse design, which can be removed conveniently.
Color : White
ConnectorType : Elbow
ExteriorFinish : Plastic
ItemName : DERPIPE Pneumatic Valve, 3/8" x 3/8" Push to Connect Fitting, Air Flow Control Hand Valves, Straight Quick Connect Union (pack of 2)
ItemPackageDimensions_Height : 14.8082 centimeters
ItemPackageDimensions_Length : 3.302 centimeters
ItemPackageDimensions_Width : 11.9126 centimeters
ItemPackageQuantity : 1
ItemShape : 90° Elbow Swivel
ItemTypeKeyword : push-to-connect-tube-fittings
Manufacturer : DERPIPE
Material : Plastic
Material1 : Plastic
Material2 : Nylon
ModelNumber : W169PLP-4-2
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : DERPIPE80305
ProductDescription : Push fitting hand valves are designed to turn on and off the airflow, in the open position, air flows from input to output, in the closed state, the exhaust port will communicate with the exhaust port to exhaust the compressed air in the equipment to the atmosphere. The convenient switch provides instant on and off, elliptical release rings help to connect the tube easily by manual, no special tools required, narrow space is also suitable with the fitting.
Pneumatic push fitting is widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical. Plastic Push connector is available in various styles and models, each model to serve its purpose, all models of push lock fittings are designed to suit your pneumatic piping needs perfectly. You can easily change the tubing connector direction. Narrow space is also suitable with the push.

CAUTIONS:
1.Please do not use it for purposes other than fluids.
2.Please do not exceed the maximum use pressure when using.
3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint.
4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage.
5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage.
6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.
7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.

ProductSiteLaunchDate : 2022-02-28T07:35:58.176Z
Size : 3/8 Inch
Style : Pack of 2
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600