Cart 2 india

Specification
AgeRangeDescription : adult
Brand : AOHOCA
BulletPoint1 : Material:brass stainless steel,mosaic pins are hand-crafted for knife maker
BulletPoint2 : Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
BulletPoint3 : Diameter: 8mm,Length: 90mm,You get 1 piece of mosaic pin stock with each order for knife handles.You can cut any length as your knife handle thickness,great gift for your custom knives craftsman
BulletPoint4 : It is better for approximately 1/8" extends beyond the scales before you start sanding.
BulletPoint5 : You can get 1 piece of mosaic pin
Color : Red
ExternallyAssignedProductIdentifier : 9487504451704
ExternallyAssignedProductIdentifier1 : 0705794776147
ExternallyAssignedProductIdentifier2 : 705794776147
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IsValueStoresItem : 1
ItemName : AOHOCA 8mm Colored Mosaic Knife Scale Rivet Pin,Resin Filling Pocket Knife pin for Handle Decorative,Length 90mm (Red)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 0.13 inches
ItemPackageQuantity : 1
ItemTypeKeyword : push-in-rivets
Manufacturer : AOHOCA
Material : Plastic
Material1 : Brass
Material2 : Stainless Steel
ModelName : IOFIT
ModelNumber : IOFIT
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Yan USA 90mm mosaic pin
ProductDescription : Mosaic Pins for Knife Handle Custom Knives Blank Scales
Material:Brass Stainless Steel for EDC Folding Pocket Knives Pin
This unique mosaic pin was hand-crafted by an expert. Add that extra bit of flair to your knife handle.
It can be used as a solid pin or sliced into thin pieces for inlays.
Our mosaic pins have been vacuum-pumped to remove air bubbles. The resin is pulled in with a high-end vacuum, which pulls the glue down, and removes any small bubbles. The pins are cured afterward and lastly polished and burrs removed.
The Pattern length is same as the tube ,meaning : you cut any size of the rivet ,all have pattern on both side
Size : diameter:8mm,length :90mm
Package : You can get 1 piece
ProductSiteLaunchDate : 2025-06-18T06:29:51.284Z
Size : R3550
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25172600