Cart 2 india

Specification
Brand : WERKI
BulletPoint1 : [Working Mode]: Push and HOLD, Normally Open Circuit ON. Release, Normally Open Circuit OFF. Contact Configuration: 1NO1NC; SPDT ON/OFF. Used in Single circuit switch or DUAL circuit change-over.
BulletPoint2 : [LED Indication]: DC12V LED Ring. DO NOT connect to circuit voltage over 12V which will short the LED indicator. Indicator can be ALWAYS-ON or ON/OFF along with circuit.
BulletPoint3 : [Mounting]: Diameter size:19mm. Mounting hole diameter should be At least 22mm(0.87") and Smaller than 22.2mm(0.88").
BulletPoint4 : [Reliable Material]: Stainless steel 304 and tough plastic shell. 100,000 times electrical lifelong internal silver contact.
BulletPoint5 : [Protection]: CE certified and 3-Year Care. With IP67 grade and IK08 protection, waterproof and anti-dust. This pushbutton switch can work in wet condition but NOT under water.
CircuitBreakerType : Standard
Color : Blue
ConnectivityProtocol : X-10
ConnectorType : Crimp
ControllerType1 : Push Button
ControllerType2 : Ring
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier : 6098033447453
ExternallyAssignedProductIdentifier1 : 0054279819023
ExternallyAssignedProductIdentifier2 : 054279819023
IncludedComponents : inc
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
InternationalProtectionRating : IP67
ItemName : WERKI Momentary Push Button Switch, 22mm(7/8") Mounting Hole, 12V 5 Amps Single-Pole Dual-Throw Pushbutton Switch 1NO1NC, Stainless Steel IP67 Waterproof (Blue LED Indicator)
ItemPackageDimensions_Height : 9.398 centimeters
ItemPackageDimensions_Length : 2.4892 centimeters
ItemPackageDimensions_Width : 6.096 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
Manufacturer : WERKI
Material : Aluminum,Plastic,Silver,Stainless Steel
ModelNumber : WKPB-22H-11E-JS12VB
MountingType : Snap In Mount
NumberOfItems : 1
NumberOfPoles : 2
NumberOfPositions : 3
OperatingVoltage : 12 volts
OperationMode : OFF-NONE-ON
PartNumber : WKPB-22H-11E-JS12VB
ProductDescription : Button working type: Momentary / Press&Hold.
Mounting Hole Diameter: At least 22mm(0.87") and Smaller than 22.2mm(0.88").
LED indicator: 12V DC, DO NOT connect to circuit voltage over 12V which will short the LED indicator.
Material: Stainless steel 304 or Black finish aluminum alloy; And plastic.
Contact amps: 5 Amps.
Contact Configuration: 1 Normally Open and 1 Normally Close.
Contact Material: Silver alloy.
Protection grade: IP67 & IK08.
100,000 Times Electric Work Life.
Operating Temperature : -17℉ to 149℉.

Package including:
1 x Push button switch
1 x Mounting nut
1 x Rubber seal ring
1 x Pigtail connector
1 x Wiring instruction

ProductSiteLaunchDate : 2022-08-24T03:21:09.676Z
Size : Stainless Steel
SpecificationMet : Ce Certified,ip67
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Spdt
UnitCount : 1
UnspscCode : 39122200
Voltage : 12 volts