Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Product Name: Hoist Crane Pushbutton Switch;Push Buttons: 2 Ways: Up, Down
BulletPoint2 : Model: CLD-621;Operation Type: Momentary; Material: ABS,Metal
BulletPoint3 : Package Content: 1 x Hoist Crane Pushbutton Switch; Ui: AC 500V;Ith: 5A
BulletPoint4 : Total Size: 13.8 x 7.6 x 7.2cm / 5.4'' x 3" x 2.8" (L*W*H)
BulletPoint5 : Suitable for open-air, rain and snow, and more dust against the environment, such as remote control of cranes, electric hoist and other equipment used.
CircuitType : 2-way
Color : Orange
ConnectivityProtocol : X-10
ConnectorType : Screws
ControllerType : Push Button
ControlMethod : remote
CurrentRating : 5 amps
CurrentRating1 : 10 amps
CurrentRating2 : 3 amps
FitType : Universal
InternationalProtectionRating : IP67
ItemName : uxcell Hoist Crane Pendant Control Station ABS Push Button Switch Up Down 2 Ways Orange
ItemPackageDimensions_Height : 15.9 centimeters
ItemPackageDimensions_Length : 7.7 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
Manufacturer : uxcell
Material : Plastic
Material1 : Plastic
Material2 : Metal
ModelNumber : a18051700ux0205
MountingType : Panel Mount
NumberOfItems : 8
NumberOfPositions : 2
OperatingVoltage : 250 volts
OperatingVoltage1 : 125 volts_of_alternating_current
OperatingVoltage2 : 250 volts_of_alternating_current
OperationMode : Push Button
PartNumber : a18060600ux0237
ProductDescription : Features:
Model: CLD-621
Operation Type: Momentary
Material: ABS,Metal
Ui:AC 500V
Ith: 5A
AC-15:AC250V/500V Ie 5A/2A
Push Buttons: 2 Ways: Up, Down
Total Size: 13.8 x 7.6 x 7.2cm / 5.4-inch x 3-inch x 2.8-inch (L*W*H)

Descriptions:
Features: Up, Down 2 push buttons.
ABS housing, waterproof.
Suitablel pendant control station for Hoist and Crane.

Instructions for use:
1.Remove the end caps, install the sealing sheaths, and fasten them to the end faces of the buttons by screws
2.Remove the bottom cover, put all the control wires into the sealing sheath, and fasten them to the terminals of each button according to the electrical schematic.
3.Check or test the wiring is correct. If everything is normal, bundle the leads and fix them, and finally reinstall the bottom cover.

ProductSiteLaunchDate : 2018-07-27T19:04:01.790Z
Size : red-5pcs
SpecificationMet : Abs
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Button
UnitCount : 1
UnspscCode : 39122216