Cart 2 india

Specification
Brand : Larcele
BulletPoint1 : Metal Shell made from affordable Brass, matching plastics and Electric Parts to build the push button switch.
BulletPoint2 : Rated current and voltage: 2A/36V DC. Button head diameter about 9mm(Very Small).Please check the Size map before purchase.
BulletPoint3 : Normally Open switch, without led indicator. Head protection level: IP65,IK08.
BulletPoint4 : Contact resistance: less 50mΩ. Insulation resistance: over 1000mΩ. Operating temperature: -20~+55 ℃.
BulletPoint5 : Commonly used as vehicle horns, ignition switch, doorbells, home appliances button,and car, engineering equipment project.
CircuitType : 1-way
Color : Flat Head
ConnectivityProtocol : X-10
ConnectorType : Plug In
ControllerType : Push Button
ControlMethod : touch
CurrentRating : 2 amps
ExternallyAssignedProductIdentifier : 8011616924132
ExternallyAssignedProductIdentifier1 : 701715440753
ExternallyAssignedProductIdentifier2 : 0701715440753
FinishType : Painted
FitType : Universal
InternationalProtectionRating : IP65
ItemName : Larcele Mini Push Button Switch Waterproof Momentary Metal Automatic Return Button Switch JSANKG-01,5 Pieces (12mm, Flathead)
ItemPackageDimensions_Height : 15.367 centimeters
ItemPackageDimensions_Length : 1.524 centimeters
ItemPackageDimensions_Width : 10.287 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
Manufacturer : Larcele
Material : Metal
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Plastic
ModelNumber : JSANKG-01US-FW12
MountingType : Embedded
NumberOfItems : 5
NumberOfPositions : 2
OperatingVoltage : 36 volts
OperationMode : ON-OFF-ON
PartNumber : LCE-JSANKG-US01-FW
ProductDescription : Mounting hole: 12mm
Protection level: IP65, IK08
manipulation Type: Momentary. Pressed button= on, release button= off.
Package included: 5 pieces Push Button Switch
These buttons switch are perfect for Horn Button Switch, PC Power Switch or any circuit controls. Also great for electronic DIY projects.

The terminals are small, need to be very careful when soldering the wires on to them.
Recommended solder within 3 seconds
Note:
1.Installation instruction and wiring diagram are not included in the package.
2.Professional installation is highly recommended.

Any incorrect welding manipulation may lead to product plastic deformation or bad contact switch. Users in the use of pin type button switch, signal light, the phenomenon of improper welding cause damage occurred, therefore we would advice users in the terminal manipulation is important to note the following points:
1.Select the appropriate electric iron, to speed up the welding speed, it is recommended to use 20W soldering iron within 3 seconds to complete welding.
2.The amount of flux must be welded to make the switch to pin down.
3.Maximize the use of the plug wire terminal commection, to avoid the welded connection.
4.Temperature too high or wrong welding the tin spots, and other reasons will cause the internal structure of the switch to be deformed.
ProductSiteLaunchDate : 2019-02-27T08:00:00.000Z
Size : 12mm
SpecificationMet : Ip54
Style : momentary
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Spst
UnitCount : 1
UnspscCode : 39122216