Cart 2 india

Specification
Brand : Larcele
BulletPoint1 : Metal Shell made from sturdy stainless steel, matching plastics and Electric Parts to build the push button switch.
BulletPoint2 : Rated current and voltage: 5A 250V AC. Button head diameter about 12mm.
BulletPoint3 : Normally Open switch, without led indicator. Head protection level: IP67,IK10.
BulletPoint4 : Contact resistance: less 50mΩ. Insulation resistance: over 1000mΩ. Operating temperature: -20~+55 ℃.
BulletPoint5 : Most often latching switches are used for various additional electric equipment, inside and outside the car(such as critical lights, chassis lamp, fog lamps, dome light).
CircuitType : 1-way
Color : Silver
ConnectivityProtocol : X-10
ConnectorType : Through Hole
ControllerType : Push Button
CurrentRating : 5 amps
CurrentRating1 : 10 amps
CurrentRating2 : 3 amps
ExternallyAssignedProductIdentifier : 8011616924163
ExternallyAssignedProductIdentifier1 : 703931649583
ExternallyAssignedProductIdentifier2 : 0703931649583
InternationalProtectionRating : IP67
ItemName : Larcele Mini Metal Push Button Switch Waterproof Latching DIY Switch JSANKG-01,5 Pieces (16mm)
ItemPackageDimensions_Height : 1.1 inches
ItemPackageDimensions_Length : 7.4 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
Manufacturer : Larcele
Material : Metal
Material1 : Plastic
Material2 : Metal
ModelNumber : JSANKG-01US-ZS16
MountingType : Embedded
NumberOfItems : 200
NumberOfPositions : 10
OperatingVoltage : 250 volts
OperationMode : Off,Push Button
PartNumber : LCE-JSANKG-US01-ZS
ProductDescription : Mounting hole: 16mm
Protection level: IP67, IK10
manipulation Type: Momentary. Pressed button= on, release button= off.
Package included: 5 pieces Push Button Switch
These buttons switch are perfect for Horn Button Switch, PC Power Switch or any circuit controls. Also great for electronic DIY projects.

The terminals are small, need to be very careful when soldering the wires on to them.
Recommended solder within 3 seconds
Note:
1.Installation instruction and wiring diagram are not included in the package.
2.Professional installation is highly recommended.

Any incorrect welding manipulation may lead to product plastic deformation or bad contact switch. Users in the use of pin type button switch, signal light, the phenomenon of improper welding cause damage occurred, therefore we would advice users in the terminal manipulation is important to note the following points:
1.Select the appropriate electric iron, to speed up the welding speed, it is recommended to use 20W soldering iron within 3 seconds to complete welding.
2.The amount of flux must be welded to make the switch to pin down.
3.Maximize the use of the plug wire terminal commection, to avoid the welded connection.
4.Temperature too high or wrong welding the tin spots, and other reasons will cause the internal structure of the switch to be deformed.
ProductSiteLaunchDate : 2019-02-27T08:00:00.000Z
Size : 16mm
SpecificationMet : Ip67
Style : self lock
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Button
UnitCount : 1
UnspscCode : 39122200