Cart 2 india

Specification
Brand : JacobsParts
BulletPoint1 : Latching maintained pushbutton power switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a power switch for auxiliary LED accent lights on truck beds, boat trims, sailboat masts, car underbodies, and motorcycles
BulletPoint2 : This switch is constructed of non-oxidizing, corrosion resistant stainless steel. It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage
BulletPoint3 : The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it
BulletPoint4 : Installation: Cut mounting hole in the panel using a 5/8" drill bit. Screw the threaded "neck" of the switch into the panel cutout hole and secure it on the reverse side of the panel with the included metal nut. The included rubber O-ring may optionally be used for additional water resistance by placing the ring between the top of the neck (just behind the faceplate) and the front of the panel. Package includes switch, metal nut and rubber O-ring
BulletPoint5 : Operation Type: Latching/Maintained (Push it, ON; Push it again, OFF); Max Switch Rating: 250V AC/DC 3A; LED rating: 12V DC 15mA; Panel Cutout Diameter: 5/8" (16mm)
BulletPoint6 : Mounting Type: Panel Mount, Snap-In
BulletPoint7 : Termination Style: Solder Lug
BulletPoint8 : Actuator Marking: No Marking
CircuitType : 1-way
Color : Red
ConnectivityProtocol : X-10
ConnectorType : Screw
ControllerType : Ring
ControllerType1 : Push Button
ControllerType2 : Ring
ControlMethod : touch
CurrentRating : 3 amps
ExternallyAssignedProductIdentifier1 : 845832014845
ExternallyAssignedProductIdentifier2 : 0845832014845
FitType : Universal
IncludedComponents : CONNECTOR
InternationalProtectionRating : IP67
ItemDisplayDimensions_Length : 4 inches
ItemDisplayWeight : 2.4 ounces
ItemName : JacobsParts Latching Maintained Pushbutton ON/Off Switch Circular Metal Silver with Red Power Symbol LED Light fits 5/8" (16mm) Diameter Panel Cutout Hole
ItemPackageDimensions_Height : 15.4 centimeters
ItemPackageDimensions_Length : 2.1 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
LowerTemperatureRating : -25 degrees_celsius
Manufacturer : JACOBSPARTS
Material : Metal
ModelName : Am-PBS07-0101
ModelNumber : LTCH-C3-RED
MountingType : Panel Mount
NumberOfItems : 1
NumberOfPositions : 1
OperatingVoltage : 12 volts
OperationMode : ON-OFF
PartNumber : LTCH-C-RED
ProductDescription : Specifications
Operation Type: Latching/Maintained (Push it, ON; Push it again, OFF)
Panel Cutout Diameter: 5/8" (16mm)
Thread Depth: 5/8" (16mm)
Total Depth (Including Contacts): 1.5" (36mm)
Faceplate Diameter: 3/4" (18mm)
Max Switch Rating: 250V AC/DC 3A
LED rating: 12V DC 15mA
Circuit Type: 1NO1NC (one pair of normally open contacts and one pair of normally closed contacts)
Switch Type: SPDT (Single Pole, Double Throw)
Enclosure Material: Stainless Steel
Protection Level: IP67
Operation Temperature: -20C to 55C

• Latching switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects
• Constructed of stainless steel; resists rust and corrosion
• The switch and LED are separate. The LED can be on all the time or only when the switch is ON, depending on how you wire it
• Rated PI67 waterproof. May be exposed to heavy rain, splashes, etc. without damage

ProductSiteLaunchDate : 2015-11-23T18:26:10.156Z
Size : 16mm
SpecificationMet : Ip67
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Temperature Switch
SwitchType1 : Toggle
SwitchType2 : Push Button
TerminalType : Spdt
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 55 degrees_celsius