Cart 2 india

Specification
Brand : DMWD
BulletPoint1 : Latching: Press the button-ON, Press the button again-OFF; Electrical life: 100, 000 times, Mechanical life: 500,000 cycles
BulletPoint2 : Mounting Hole: 16mm(5/8"); Structure: 1NO 1NC; LED Light: 5A, 12-24V, Halo Ring Green; LED life: 40,000 hours
BulletPoint3 : 4 wiring methods: Normal Open or Normal Closed; LED light can be always on, or illuminates when the device is working; 5 brass terminals are connected to the wire socket, No need to solder which makes your operation much easier
BulletPoint4 : Protection Degree: IP66 Waterproof and dustproof; IK09 Anti-vandal rate. It can be used in wet or dusty environment; But Don’t immerse the button switch in water
BulletPoint5 : Wide Applications: Suitable for car, computer, instrument and meter industry, door bell, home appliance etc.
Color : Green
ConnectivityProtocol : X-10
ConnectorType : Usb
ControllerType1 : Push Button
ControllerType2 : Ring
CurrentRating : 3 amps
InternationalProtectionRating : IP66
ItemDisplayWeight : 1 pounds
ItemName : DMWD 2PCS 16MM Latching Metal Push Button Switch Ring Led 12V-24V Self Locking 1NO 1NC Waterproof ON/Off Black Shell Button with Pre-Wired Socket for 5/8’’ Mounting Hole(IP66,Green Light)
ItemPackageDimensions_Height : 8.509 centimeters
ItemPackageDimensions_Length : 2.3876 centimeters
ItemPackageDimensions_Width : 6.2992 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-pushbutton-switches
LightType : led
Manufacturer : DMWD
Material : Aluminum
Material1 : Brass
Material2 : Metal
ModelNumber : HXDZSCZYHH-16MM-Lu
MountingType : Panel Mount
NumberOfItems : 2
OperatingVoltage : 24 volts
OperationMode : Off,Push Button
PartNumber : ANYHH-HXZFDX-16G2-CA
ProductDescription : Description:
Charging voltage: DC 4.5V-5.5V (DC 5V recommended)
Charging current : 0-2.1A
Charging quiescent current : 100uA
Full voltage: 4.2V+-1%.
Discharge current: 0-2.4A;
Discharge quiescent current : 50uA
Discharge efficiency: up to 96%
Output voltage: 5V
Output current: 0-2.4A;
Ambient temperature: -20° to +85°
Pin description:
VIN : Charge port positive input +
GND : Charger Negative Input -
BAT : Lithium Battery +
GND : Lithium Battery -
GND : Output negative output -
VOUT: Output Positive Output +
KEY : Output Enable Trigger Port (Low Pulse Trigger)

Use tutorial:
1.In the discharging mode (the charging mode KEY function is invalid), the KEY port is triggered once and the output is turned on; the KEY port is triggered twice in succession and the output is turned off.
2.The first time you access the load, the output is automatically turned on. If the load is less than 50MA, the output will be turned off after 30 seconds; if the load is greater than 50MA, the output will be continuously turned on.
3.When the module is charging, the output will switch the external power supply (it
will be powered off for 0.3s). The charging output voltage will be less than >4.7/<5V,
depending on the charger load capacity!
4.Trigger mode: low level trigger (ground)
MCU users, if you accept a small load KEY can be connected to the microcontroller about 20S to give a low level allows the module to continue working!
Connect the user of the single-chip microcomputer, if the small load KEY can be
connected to the single-chip 20S to give a low level, the module can continue to work

Package Included:
5 x 2A 5V Charge Discharge Integrated Module
1 x USB Female Cable

ProductSiteLaunchDate : 2021-12-25T04:17:03.912Z
SpecificationMet : Ma
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Button
UnitCount : 2
UnspscCode : 39122216